The Digidesign PRE 8 Channel Mic Preamp. 8-channel high definition mic preamp delivers the clearest possible signal to your Pro Tools sytem.
The Digidesign PRE features eight discrete, matched-transistor, hybrid mic-preamp circuits, each delivering a transparent signal path designed specifically for the Pro Tools|HD environment. PRE accepts nearly any input signal, easily accommodating mic, line, and direct instrument (DI) level inputs on all eight channels. Comprehensive remote-controllable operation via the Pro Tools software interface or Digidesign control surfaces allows you to place PRE anywhere in the studio and retain the ability to take advantage of its entire rich feature set from where you want to operate. PRE also functions exceptionally as a stand-alone device, making the same high-end sonic quality available for non-Pro Tools applications and all standard MIDI controllers.
The main features of the Digidesign PRE include:
- 8 high-performance, discrete, matched-transistor hybrid microphone pre-amplification circuits
- Support for mic (XLR), direct instrument (DI), and line level inputs (1/4 inch jack)
- Each channel includes a high pass filter, phase reverse, 48V (phantom power) and -18 dB pad
- Fully remote-controllable via Pro Tools software and Digidesign control surfaces; allows for the highest fidelity by keeping low-level signals close to the source
- Selectable impedance matching for mic, line, or instrument inputs
- MIDI IN/OUT/THRU ports for remote operation
- All features supported in stand-alone mode, making PRE an ideal analog front end for any recording system Circuit Topology: Discrete Matched Transistor Hybrid
- Inserts points on all 8 mic pre channels
- Input Gain: 0 dB to +69 dB in 3 dB steps, with -18 dB pad engaged; -18 dB to +51 dB
- Maximum Input Level: +47 dBu, pad in, @ 1 kHz, less than 0.1% THD
- Mic E.I.N (unweighted): -128 dB @ 66 dB gain (20 Hz to 20 kHz) 150 ohm
- THD+N: less than 0.0005% @ 1 kHz, 0 dB gain @ 20 dB signal; < 0.001% (20 Hz to 20 kHz), 0 dB gain @ 0 dB signal
- CMMRR: less than - 75 dB @ 1 kHz, 140 mVcm, +6 dB gain
- Crosstalk: less than -90 dB (20 Hz - 20 kHz)
- Frequency Response: 0.1 dB; 20 Hz to 20 kHz, @ +48 dB gain
- Input Impedance (Input Z): 1.5 kohm (low); 15 kohm (mid); 1.5 Mohm (high)
- Phantom Power: 48V +/ - 1V
- High Pass Filter: -3 dB @ 85 Hz, 18 dB/ octave
- Maximum Output Level: +29 dBu, balanced, @ 1 kHz, less than 0.1% THD
Digidesign PRE 8 Channel Mic Preamp (code 9522)
Features eight discrete, matched-transistor, hybrid mic-preamp circuits, each delivering a transparent signal path designed specifically for the Pro Tools|HD environment.
£1,616.77 (inc vat)