This Recording Bundle includes the Focusrite Scarlett 2i2 USB Audio Interface and the sE Electronics X1 Large Diaphragm Condenser Microphone - great for recording professional vocals and instruments in project studios.
The Focusrite Scarlett 2i2 USB Mobile Interface is designed for the mobile musician. Fitted with award-winning technology the Scarlett 2i2 has been built around the popular Scarlett 8i6. The result is a more portable and affordable audio interface for home and project studios.
The sE Electronics X1 Microphone is a large diaphragm condenser with a 10dB pad and bass cut added. The X1 is hand built in sE’s own facility in Shanghai using quality components.
The SE Electronics Metal Pop has a mesh head made entirely from steel, rather than the old-style ‘ladies tights’ design.
The Focusrite Scarlett 2i2 Features:
- Inputs 1 and 2: Neutrik Combo input sockets - Connect microphones, instruments (e.g., guitar) or line level signals via XLR or 1/4" (6.35 mm) jacks as appropriate
- Gain 01 and Gain 02: Adjust the input gain for input signals on inputs 1 and 2 respectively. The gain controls have concentric bi-colour LED ‘rings’ to confirm signal level: green indicates an input level of at least -24 dBFS (i.e., ‘signal present’), the ring then turns red when signal level reaches 0 dBFS
- 48V phantom power switch for mic inputs: Enables +48 V phantom power at the XLR contacts of both Combo connectors
- LINE/INST: Line / Instrument level switches for each input – switches gain to suit instrument or line level signals
- MONITOR: Main monitor output level control - sets the output level at the main (rear panel) outputs 1 & 2
- USB LED: Illuminates when the unit receives USB bus power and is recognised by the host computer
- Headphone level: Adjusts the output level at the front panel stereo headphone output
- Headphone socket: 1/4" TRS output jack - connect your stereo headphones here
- Kensington security lock: Secure your Scarlett 2i2 to a suitable structure if desired
- USB 2.0 port: Type B connector; connect to your computer with cable supplied
- Line outputs: 2 x 1/4" (6.35 mm) TRS jack sockets; +4 dBu output level
- A-D dynamic range: 105 dB ‘A-weighted’ (all inputs). Converter chipset A-D dynamic range 114 dB
- D-A dynamic range: Range 104 dB ‘A-weighted’ (all outputs). Converter chipset D-A dynamic range 114 dB
- Supported sample rates: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
- THD+N: 0.002% (minimum gain, -1 dBFS input with 20 Hz - 22 kHz filter)
- Mic 1 and 2 Input impedance: 2 kOhm
- Line Input impedance: 10 kOhm
- Dimensions (WxHxD): 175 mm x 45 mm x 100 mm
- Weight: 0.5 kg
The sE Electronics X1 Features:
- Frequency Response: 20Hz-20KHz
- Sensitivity: -32 dBV/Pa (25.1mV/Pa)
- Polar Pattern: Cardioid
- Impedance: = 200 Ohms
- Equivalent Noise Level: 16dB(A weighted)
- Max SPL for 0.5% THD@1000Hz: 125dB
- Power Requirement: Phantom power 48V±4V
- Connector: 3-pin
Focusrite 2i2 and sE X1 Recording Bundle (code 92183)
Bundle Includes Focusrite 2i2 USB Audio Interface, sE Electronics X1 Microphone and Metal Pop Shield [UXB]
£219.00 (inc vat)