The RME HDSP PCI Desktop Interface for Multiface, Digiface and RPM. The PCI engine of the Hammerfall DSP System with up to 130 MB/s transfer rate, interfaces with Hammerfall DSP I/O-boxes Digiface, Multiface and RPM
The RME HDSP PCI is a valuable part of the Hammerfall DSP System. To interface with the Hammerfall DSP I/O-boxes Digiface, Multiface and RPM, the PCI engine of the Hammerfall DSP System is built on a Zero wait state PCI Busmaster core. With up to 130 MB/s transfer rate in both directions the maximum performance available on the 32 bit PCI bus is used. Additionally the card offers highest compatibility by being 100% Plug & Play compatible under Windows and MacOS, and being able to share interrupts. The card itself will only use one interrupt (IRQ) for all functions (audio/MIDI). The connection between the RME HDSP PCI card and I/O box is established using ordinary firewire cable (IEEE 1394, 6-pole). The data transfer does not use Firewire protocol, but RME 's own proprietary bus protocol. The supplied cable is 4.5 m (15 ft.) long, a cable length up to 15 m (48 ft.) has been successfully tested. A specially designed Repeater can be used to reach cable lengths of up to 30 m (100 ft). The RME HDSP PCI card operates as power supply for the attached I/O-box. The RME HDSP PCI card includes two Sync-connectors for synchronisation of multiple interfaces.
The main features of the RME HDSP PCI include:
- The PCI engine of the Hammerfall DSP System with up to 130 MB/s transfer rate, interfaces with Hammerfall DSP I/O-boxes Digiface, Multiface and RPM
- Short PCI 2.0 compliant PCI card, 32 bit, 3.3 V, PCI-X compatible
- Zero wait state PCI Busmaster interface (130 MB/s transfer rate in both directions)
- Secure BIOS Technology: card stays fully functional even when the flash process fails
- Output: IEEE 1394 connector, RME bus protocol
- Package contents: PCI card, cable 4.5 meter (15 ft) IEEE 1394a
- System Requirements with the RME HDSP PCI are Windows 98/ME, 2000, XP, Pentium II 300 MHz,128 MB RAM Or Mac OS 8.6 or higher, OS X 10.2 or higher
RME HDSP PCI Desktop Interface for Multiface Digiface and RPM (code 10751)
The PCI engine of the Hammerfall DSP System with up to 130 MB/s transfer rate, interfaces with Hammerfall DSP I/O-boxes Digiface, Multiface and RPM.
£209.00 (inc vat)