RME TCO-HDSPe - Time Code Option for HDSPe cards

TCO-HDSPe - Time Code Option for HDSPe cards description:

The RME TCO-HDSPe is an optional extension for selected RME cards. Placed in a free slot of the computer chassis the TCO will be connected with the main card via a flat ribbon cable.

The RME TCO HDSPe provides the HDSPe cards with a Word Clock input and offers a synchronization to LTC and video. The TCO not only extracts absolute positions from LTC, but also a very clean low-jitter word clock from LTC and video. Thus a sample accurate timecode synchronization to audio or video sources is assured. One single TCO can be used with different HDSP/HDPe cards at the same time (multicard), if connected to a supported card

The RME TCO has a combined switchable Word Clock/Video input (BNC) as well as an LTC input (BNC). The Word Clock /Video input on the card can comfortably be terminated (relay-controlled) with a 75 Ohm terminator from the settings dialog. The TCO also features an additional LTC output (BNC) with two level settings (configurable via jumper).

The RME TCO-HDSPe Main Features Include:

• LTC In - BNC unbalanced
• Level range: -25 dBu up to +12 dBu
• Video In (Word Clock In)
• BNC switchable termination 75 Ohm
• Format: PAL and NTSC
• Word Clock In (Video In) - BNC, switchable termination 75 Ohm
• Transformer coupled, galvanically isolated input
• Not affected by DC-offsets within the network
• Signal Adaptation Circuit: signal refresh through auto-center and hysteresis
• Overvoltage protection
• Level range: 1.0 Vpp - 5.6 Vpp
• Lock Range: 28 kHz - 200 kHz
• Jitter when synced to input signal: < 1 ns
• Jitter suppression: > 30 dB (2,4 kHz)
• LTC Out - BNC
• Output level: +4 dBu, via Jumper -7 dBu
• Outputs impedance: 220 Ohm
• Word Clock Out - BNC
• Max output voltage: 5 Vpp
• Output voltage @ 75 Ohm: 4,0 Vpp
• Outputs impedance: 10 Ohm
• Frequency range: 28 kHz - 52 kHz
• Power supply via ribbon cable, 5 V DC, 100 mA