The DV Starter Party Pack includes a Numark MixTrack Pro Software Controller, Phonic SEM715 PA Speakers, QSC GX3 Power Amplifier, Equinox Lighting System plus all the necessary Stands and Cables.
Numark Mixtrack Pro DJ Software Controller - A powerful, digital DJ performance system for performing and producing with software.
MIXTRACK PRO's professional, audio interface feeds pristine sound to both outputs and your headphones. You can even plug in a microphone and talk over your mix.
MIXTRACK PRO connects to your Mac or PC as a class-compliant USB device so it requires no software drivers to work, and USB powers it so you won't need an external supply.
Numark Mixtrack Pro Main Features Include:
- Large, touch-sensitive platters for accurate control and scratching
- Classic, dual-deck layout with complete mixer section
- Hardware controller with built-in audio I/O
- Lighted controls indicate status in software for less time looking at the computer
- MIDI-over-USB controller is compatible with virtually all DJ software
- Mac and PC class-compliant USB – no software drivers to install
- USB-powered device does not require additional power supply
- Includes Traktor LE software
- Works with MP3, WAV, AIFF, FLAC, Ogg Vorbis, WMA (non-DRM, Windows only), AAC (non-DRM), and audio CDs (requires CD drive on computer)
- Comes with USB cable, Audio cable (RCA stereo), Software CD, Quick start guide
The Phonic SEM715 2-way Stage Speaker displays a power handling ability of up to 400 Watts on Program or 200 Watts on RMS.
The Phonic SEM715 incorporates 15 heavy duty woofers with piezo tweeters, and partners well with Phonic Powerpod 740, 1060, and 1062 as well as the more powerful Powerpod 1860 Deluxe for their capability to handle more power.
Phonic SEM715 main features:
- Power handling (RMS / Program): 200 / 400 Watts
- Frequency response: 50 Hz ~ 20 KHz
- Sensitivity: 98 dB SPL @ 1 W / 1m
- Built-in handle plus steel corner protectors
- 15" heavy-duty woofer & piezo tweeter
- 8 O nominal load
- Built-in 35 mm stand adapter
- Dual 1/4" phone jacks
- Doubles as a floor monitor when turned on its side
The QSC GX3 350W Amplifier is ideal for professional entertainers who require maximum performance and portability on a limited budget.
The QSC GX3 features dramatic styling, easy hookup and adjustments, excellent audio quality and QSC reliability. The GX3 delivers just the right amount of power to the most popular speakers used by entertainers. Most loudspeaker manufacturers recommend an amplifier with power output equal to the speaker's "Program (Music) Power" rating or two times (2 x) the "Continuous (RMS) Power" rating.
The GX3 uses the latest evolution of the QSC Grounded Collector output system, for optimum cooling of the critical power transistors. A true Class B biasing system combines maximum thermal efficiency with excellent audio performance.
QSC GX3 main features include:
- Power levels matched to the most popular speakers used by entertainers
- Optimized for maximum real-world headroom into 4 ohm and 8 ohm speaker systems
- Output 300W/Ch. at 8 Ohms or 425W/Ch. at 4 Ohms
- Inputs: XLR, 1/4" TRS and phono input connectors for compatibility with any source
- Outputs: Speakon combo accepts, 1/4" (TS) plugs or Speakon 2-pole and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems.
- Minimum depth chassis (10.1" / 257 mm) fits in compact, inexpensive effects racks
- Lightweight – less than 26 lbs (12.5 kg)
- Detented gain controls for precise setting and matching of sensitivity
- GuardRail automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
- Front panel LEDs monitor Power, Signal and Clipping
- Subwoofer/Satellite crossover built-in
- Frequency Response 20 Hz - 20 kHz, +0, -1 dB
- Dynamic Headroom (4 ohms) 2 dB
- Input Impedance (ohms) Greater than 20k (balanced)
- Maximum Input Level +24 dB (16 Vrms)
- Input Connectors (each channel) 3-pin XLR and 1/4" TRS, balanced, parallel
Phono, unbalanced
- Output Connectors (each channel) Speakon, 1/4", Binding Posts
- Amplifier and Load Protection Short circuit, open circuit, thermal, RF protection. Load protected against DC faults
- Front Panel Controls and Indicators: Gain controls, 21 detents
Red Clip LEDs, proportional, 0.1% THD threshold, Green Signal LEDs, threshold -35 dB, Blue Power LED, AC on
- Rear Panel Controls Full Range / Crossover switch, 100 Hz, 3rd order LP (sub), 2nd order HP (top)
- Dimensions: Height: 3.5" (89 mm) 2RU, Width: 19" (483 mm), Depth: 10.1" (257 mm)
- Weight 11.5kg
The Equinox Maxi Bar LED PAR Can System is a complete and versatile set of LED parcans mounted on a T-Bar which incorporates a comprehensive DMX controller. For ease of use a 4-Way footswitch is providided. The 4 slimline fittings house a total of 432 Ultra bright 10mm LEDs split between blue, green and red. When used in combination, these can produce pretty much any colour, including white. Overall, the power consumption is impressively low 64W nominal.
The T-bar houses a full DMX controller can be set to any one of 15 DMX channels includes a mode display screen and buttons for Menu, Up and Down. When foot mode is selected the unit is essentially in foot-controller mode, which can be either sound activated or based on one of nine presets. If you want to increase the impact by adding further Maxi-Bars, they are easily daisy-chained in master/slave fashion using standard XLR cables.
The footswitch unit is gratifyingly robust, with a folded steel case and very substantial switches. There are four switches in all, which are labelled: Preset, Sound, Hold and Blackout.
Each array sits in an adjustable bracket, giving plenty of vertical and horizontal adjustment, and connects to the T-bar via a locking connector that can remain in place when packing. The T-bar itself fits onto the included tripod stand and comes supplied in its own road bag. The rest of the system fits into the padded zip-up case, which has a side pocket large enough to hold the footswitch.
Equinox Maxi Bar LED PAR Can System:
- LEDs: 432 Ultra Bright 10mm LEDs (R: 144, G: 144, B: 144)
- DMX channels: 2, 3, 4, 7, 8, 14, and 15 selectable
- Individual tilt & swivel on each panel
- Beam angle: 30 degrees
- 3-Pin XLR In/Out sockets for DMX
- 1/4" jack foot switch socket
- Slimline design
- DMX 512 compatible
- Linkable - connect multiple kits to one controller
- Height adjustable stand
- All metal design
- Ultra low heat output
- Power consumption: 64W
- Dimensions: 1280 x 380 x 135mm
DVille SPS-0820 Heavy duty telescopic tripod PA speaker stand with locking clamp system and security pin height adjustment with a maximum 25kg/55lb handling capacity.
The Hills/Proel 10M SPEAKON/SPEAKON CABLE is a 10 metre speaker cable with Speakon type connectors. The cable used has been designed to remain rugged and flexible without compromise to electrical performance.
DV Studio Cable DVSCCPR203 3m Dual Phono - Dual Jack Audio Cable: great value, good quality 3 Metre Dual Phono to Dual Jack cable with rugged, metal 1/4 inch jack (TS) plugs and gold plated phono/RCA type connectors. Each connector is colour-coded for easy definition. Digital Village studio audio and video cables have been exclusively designed to meet the demands of modern audio, visual and broadcast applications. Special attention has been taken to produce a wide range of cables that offer excellent performance at a very reasonable price.
DV Starter Party Pack (code 86273)
Includes MixTrack Pro Software Controller, Phonic SEM715 PA Speakers, QSC GX3 Power Amplifier, Equinox Lighting System, Stands and Cables [UXB]
£849.00 (inc vat)