Line 6 DT50 112 1x12 25/50W Guitar Amplifier combines
revolutionary Bogner tube design with Line 6's HD Modelling technology.
The Line 6 DT50 goes further than any other amplifier to produce
the best amp tones. Many amplifiers offer either modelling
technology or reconfigurable analog circuitry, but DT50 offers both
to deliver something bigger than the sum of its parts. New HD
modelling technology, a host of switchable analogue components, and a
simple and elegant 2-channel interface – DT50 guitar amplifiers are
in a category all their own.
The Line 6 HD modelling technology fully integrates with Reinhold
Bogner’s most flexible tube design. They breathe unparalleled
warmth, feel and depth into the amp voicings on which all great
amplifiers are based – classic American cleans, chimey and crunchy
English tones, and modern high-gain distortion. The 4-way Voicing
switch is the heart of DT50, and flicking this switch starts a
chain reaction that produces these incredible tones.
The HD modelling technology fuels each Voicing’s preamp and tone
stack, and automatically pairs them with dynamic analogue circuitry
including tube configuration and negative feedback topology
(courtesy of Reinhold Bogner’s uniquely versatile 50-watt, EL34
power section). You get high amounts of negative feedback when you
want your American clean tones to gleam and shine, zero negative
feedback when you want your chimey English tones to sport their
signature dynamics, and everything in between. All four Voicings
deliver their heralded sonic signatures.
The front-panel Class A/Class AB and Pentode/Triode switches
give unparalleled sonic options. With beauty deeper than its
striking good looks, DT50 has a traditional two-channel format that
is stunningly simple and instantly usable.
Get total analog reconfiguration with one touch. Any combination
of Voicing, operating class and power tube mode can be assigned to
either channel. For example, Channel A can be Voicing I/Class
A/Pentode, and Channel B can be Voicing IV/Class AB/Triode. This
streamlined and straightforward layout is free of complexity and
learning curve, and is ideal for any gigging musician.
Both channels have independent reverb for as much or as little
“spring” you need.
The DT50 also offers a “low-power” mode, which is perfect for
recording or quieter gigs. Low-power mode lets the HD modeling
technology provide both preamp and power amp tones so you can
perform with all the grit and gain you need without the volume that
normally comes with it.
Wrap it all in the tank-like construction that both Line 6 and
Bogner are famous for, and you've got years of trouble-free
performance on the road, and in the studio.
Line 6 DT50 112 main features include:
- Brand-new Line 6 HD amp modelling technology seamlessly
integrates with Reinhold Bogner’s uniquely (and extremely)
versatile tube sections
- Reconfigurable analogue circuitry: negative feedback loop,
operating class (class A, class AB), power tube mode
(pentode/triode); low-power mode; 2-channel design
- Tubes: (2) 12AX7 preamp; (2) EL34 power amp
- 12” Custom Celestion G12H90 speaker
- Front panel: (Channels A and B) Drive, Bass, Mid Treble,
Presence, Reverb, Channel Volume; Channel switch; Voicing switch;
Pentode/Triode switch; Class A/Class AB switch; Master volume;
- Back panel: MIDI I/O; Channel footswitch input; L6 LINK in and
out/thru; FX loop with Level control; Balanced direct out; Speaker
outs (4 ohm, 8 ohm and 16 ohm)
- Connect a POD HD multi-effect pedal to control all DT50
Voicings and parameters from the floor while taking advantage of
POD HD’s enormous collections of FX and HD amp models