Shure SM86 Cardioid Condenser Vocal Microphone

SM86 Cardioid Condenser Vocal Microphone description:

The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone, the SM86 withstands the rigours of touring whilst delivering studio-quality sound. The tailored frequency response of the SM86 reproduces vocals with clarity. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The built-in three-point shock mount minimizes handling noise, and a two-stage pop filter reduces wind and breath noise. The SM86 is an excellent selection for use with both stage monitors and personal in-ear monitors.

Features:

• Condenser cartridge for studio quality sound
• Tailored frequency response for a clear reproduction of vocals
• Rugged construction withstands the rigours of touring sound
• Cardioid polar pattern minimizes unwanted background noise
• Excellent choice for stage monitors and personal in-ear monitors
• Built-in three-point shock mount minimizes handling noise
• Two-stage pop filter reduces wind and breath noise
• Break Resistant Microphone Clip (A25D), Microphone Bag (26A13) and 5/8 inch to 3/8 inch Thread Adapter (31A1856) included with this microphone

Specifications:

• Transducer Type: Condenser (electret bias)
• Frequency Response: 50 to 18,000 Hz
• Output Impedance: 150 Ohms at 1 kHz, Recommended minimum load impedance: 600 Ohms
• Sensitivity (at 1,000 Hz) Open Circuit Voltage: –50 dBV/Pa (3.15 mV) (1 Pa = 94 dB SPL)
• Output Clipping Level, 1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V)
• Maximum SPL (at 1,000 Hz), 1000 Ohm load (1% THD): 147 dB
• Self-Noise: 23 dB typical, A-weighted
• Dynamic Range (1000 Ohms): 124 dB (maximum SPL to A-weighted noise level)
• Signal-to-Noise Ratio: 71 dB at 94 dB SPL (IEC 651)
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector
• Power - Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3
• Current Drain: 5.2 mA
• Connector: Three–pin (XLR) Male
• Case: Dark gray enamel-painted steel with matte-finished silver colored steel grille
• Dimensions: 7.2 x .95" (183 x 24mm) (Length x Diameter)
• Weight: 278 grams (9.8 oz)