Dynaudio Air 15 Pack 2-Way Active Nearfield Monitor Pack

Air 15 Pack 2-Way Active Nearfield Monitor Pack description:

The Dynaudio AIR 15 STEREO PACK 2-Way Active Nearfield, 10" woofer & 1.1 Softdome Tweeter. AiIntelligent two-way active nearfield monitors with 10 inch woofers and 1.1inch soft dome tweeters, ideal for both stereo and multichannel monitoring in any demanding environment.

The Dynaudio AIR 15 STEREO PACK Includes 1 Air 15 Analog/Digital Master, 1 Air 15 Slave and Air Software. Max Sample Rate 96K. The AIR 15 system is developed for both stereo and multichannel monitoring in any demanding environment. Places like post production facilities and music recording and mixing studios will benefit greatly from the technology and clear monitoring that AIR 15 provides.

Installing an AIR 15 system will be equally advantageous when it comes to smaller film editing rooms and OB vans. AIR Series goes far beyond conventional monitor performance - both in terms of sound, operation and thinking. Consisting of a number of intelligent components that communicate through a network, an AIR system always adds up to a complete and integrated solution for critical monitoring. This both for stereo and multichannel systems. All components in an AIR system are connected through the TC Link network that distributes control information as well as Audio in-between all system components. This makes it possible to control a multichannel system from the sweet spot using the AIR Remote or the AIR Software.

With the dedicated AIR software a world of tweaking and setup possibilities is available, making the AIR series the most innovative and user-friendly monitor to be found anywhere, not to speak of the unusually clear and transparent sound that the AIR Series provides. AIR monitors combine DSP and networking intelligence to provide superb performance in a compact system, and the ability to store and recall all level/alignment/EQ/bass-management parameters. Everything required for a system install is provided - speakers, internal amps, interconnect wiring, calibration tools and PC/Mac control software. Recommended AIR15 applications include Post Production, Music Recording and Mixing, Film Editing (smaller rooms), DVD authoring and Mastering, 5.1 Production (Audio or Audio for pictures), Broadcast and Edit suites.

The main features of the Dynaudio AIR 15 STEREO PACK include:

• Intelligent two-way active nearfield monitors with 10 inch woofers and 1.1inch soft dome tweeters, ideal for both stereo and multichannel monitoring in any demanding environment
• 10 inch woofer and 1.1 inch soft dome tweeter
• 192 kHz support via Dual Wire option
• Bass Management, with selectable frequency crossover points
• Advanced Bass Management
• Acoustic Placement Compensation
• Preset Storage and Recall
• Programmable reference levels
• Level alignment in 0,1dB steps
• All Monitors aligned within +/- 0.2dB precision
• Integrated Parametric EQ’s and delay in each monitor (only accessible with PC-IP)
• Direct Digital inputs and Analog inputs (optional)
• Networking in-between all AIR components
• Dedicated AIR Base subwoofers available
• Two times 200-watt amp package in each monitor
• Typical Air 15 listening distance 1.5-2.5m / 5-8,5ft
• Typical Air 15 room size 75-125 m3 / 2600-4400 ft3
• Frequency Response: 40 Hz – 22 kHz
• Peak SPL 1m, pair (IEC Short Term): > 128 dB peak
• Peak SPL 2m, 5.1 (IEC Short Term): > 126 dB peak
• Max SPL 1m, (IEC Long Term): 104 dB RMS
• Precision of monitor matching: +/- 0.2 dB
• Port tuning frequency: 40 Hz
• Internal cabinet volume: 12.1 liters
• Bass principle: Bass reflex
• Crossover frequency: 2150 Hz (DSP generated)
• Crossover slope: 24 dB/oct (Linkwitz Riley, DSP generated)
• Tweeter: Esotec 28 mm / 1.1 inch soft dome, rear chamber, magnetic fluid, 4mm die-cast alu front, pure alu wire voice coil
• Woofer: 10 inch, one-piece molded polyprop cone, 75 mm / 4 inch pure alu voice coil, magnetic shielded
• Internal sample rate: 192 and 176.4 via Dual Wire (optional Digital Card required) and 96, 88.2, 64, 48, 44.1 or 32 kHz
• AIR Masters only, I/O Connectors: XLR (2 channels AES/EBU in) 3 x RJ45 proprietary TC LINK
• AIR Masters only, Formats: AES/EBU (24 bit)
• AIR Masters only, Word clock input: BNC, 75 ohm, 0.6 to 10 Vpp
• AIR Masters only, Display: 2 x 16 character dot matrix
• AIR Masters only, Operation: Menu system / four buttons
• AIR Masters only, Analog input option, Input connectors: XLR balanced (pin 2+, pin 3-)
• AIR Masters only, Analog input option, Impedance: 10/3 k Ohm (Balanced/unbalanced)
• AIR Masters only, Analog input option, Selectable full scale input level: +9, +15, +21, +27 dBu
• AIR Masters only, Analog input option, Dynamic Range: > 113 dB typ. (unweighted), BW: 20-20kHz
• AIR Masters only, Analog input option, THD+N: < -105 dB typ. @ 1 kHz, -3 dBFS
• AIR Masters only, Analog input option, Crosstalk: < -120 dB, 20 Hz to 20 kHz
• AIR Masters only, Analog input option, A to D Conversion: 24 bit (Dual bit delta sigma sampling at 4.1/5.6/6.1/6.1 MHz)
• AIR Slaves only, I/O Connectors: 2 x RJ45 proprietary TC LINK
• Mains voltage: 100 to 240 VAC, 50 to 60 Hz (auto-select)
• Power consumption: Idle: 50W / Max: 375W
• Dimensions (H x W x D): 425x275x395mm (Depth incl. amp & driver: 432mm)
• Weight: , 15.5kg
• Price displayed is for a boxed pair of Dynaudio AIR 15 STEREO PACK monitors