Audix Micro-D Pre-Polarized Condenser Microphone

Micro-D Pre-Polarized Condenser Microphone description:

The MICRO-D is a pre-polarized condenser microphone designed for many applications including drums, percussion, amplified cabinets, speech, vocals and acoustic instruments. Used in conjunction with 3 different types of specialized clips and 2 different types of interchangeable capsules the MICRO-D becomes a modular sytem that can fulfill a wide variety of creative needs. With a smooth uniform response over a frequency range of 40 Hz 20 kHz, the MICRO-D is lightweight, compact, and extremely easy to use. Housed in an aluminum ring and isolated by means of a rubber shock mount system, the stock version of the Micro-D (model ADX20-d) has a hypercardioid pick-up pattern and is capable of handling sound pressure levels up to 140 dB.

The MICRO-D operates on phantom power of 9-52 Volts and is supplied with a phantom power adapter, integral D-vice clamp, cable, windscreen, and carrying pouch. Low noise electronic circuitry and balanced low impedance output allow for interference free performance even with long cable runs.

Features:

• Great for Drums and percussion, Orchestral zone miking, Vocal zone miking, Guitar and Bass cabinets, Cymbals, Saxophone, Brass, Acoustic instruments
• D-vice gooseneck clip (D-vice), Aluminum ring with rubber shockmount (MC20-d), Mic stand thread adapter 3/8 5/8 (TA20-d), 9-52 volt phantom power adapter (APS-910), Carrying/storage pouch included with this microphone
• Lightweight, compact, low profile
• Simple to set-up and use
• Can be used to mic multiple drums at one time
• Fits into tight spaces (between drums, beneath cymbals)
• Optional clips and accessories available
• High SPL Response - The Micro-D features an SPL rating of 140dB. Transient peaks are reproduced without noise and distortion

Specifications:

• Transducer Type: Condenser (pre-polarized)
• Frequency Response: 40 Hz - 20 kHz
• Polar Pattern: Hypercardioid
• Output Impedance: 250 Ohms
• Open Circuit Sensitivity: 5 mV (ref 1k @ 1 Pascal)
• Equivalent Noise Level: 24 dB (A weighted)
• Signal to Noise Ratio: 70 dB (ref 1k @ 1 Pascal)
• Power Requirements: 9 - 52v phantom
• Maximum: SPL 140 dB
• Cable/Connector: 3 pin gold plated male XLR connector
• Polarity: Positive voltage on pin 2 relative to pin 3 of output XLR connector
• Housing: Capsule housing is brass, Protective ring is aluminum
• Weight: 2 oz / 57 grams
• Finish: Black E-coat