JoeMeek Oneq Studio Channel

Oneq Studio Channel description:

The JoeMeek ONEQ Studio Channel. Affordable mono Mic Pre with optical compressor, De-Esser, Enhancer and bundles of character.

The JoeMeek ONEQ is a single channel combining Mic Pre (with Burr-Brown IC), four band EQ, the "signature" optical compressor, De-Esser, and Enhancer, it's a master channel like no other. Housed in a 2u chassis, the elegantly sculpted faceplate is intelligently laid out, with clear, easy to read legends and a large analog VU meter. Also included are 24bit, 96K A/D converters with word clock input and output. The new oneQ raises the bar for all studio master channels.

The main features of the JoeMeek ONEQ include:

• Affordable mono Mic Pre with optical compressor, De-Esser, Enhancer and bundles of character
• Inludes 24bit, 96K A/D converters with word clock input and output
• Input impedances: Mic: 1.2kohm; Line: 20kohm
• Pre-amp overall gain: 10dB to 60dB (variable)
• Common mode rejection: 70dB
• Equivalent input noise: -128.5dBu (unweighted)
• Distortion: 0.001% (below Compressor threshold)
• Frequency response: 15Hz to 70kHz (-3dB)
• Maximum input before clipping: Mic: +21dBu; Line: +45dBu
• Headroom before clipping: +21dBu
• Compressor threshold: Infinity dBu to -20dBu (variable)
• Compressor ratio: 1:1 to 10:1 (variable)
• Compressor attack time: 1 msec to 100 msec (adaptive)
• Compressor release time: 0.1 sec to 3 sec (adaptive)
• Nominal output levels: +4dBu/-10dBv
• Output impedance: 100ohm
• Output Level switch: 12dB attenuation
• Noise Floor: -85dBu (typical, with ~40dB mic gain)
• VU Meter: Analogue movement
• Power supply: 115V / 230V ac mains, 50/60Hz
• Power consumption: 30W
• Mechanical: 482W x 88H x 220D (overall)
• Weight: 3 kilos
• High Pass Filter: 12dB per octave cut below 80Hz
• EQ Boost & Cut: +/-15dB (zero phase-shift bell response)
• LF Frequency: 80Hz/120Hz switchable
• LMF Frequency: 200Hz to 2kHz variable
• HMF Frequency: 1kHz to 6kHz variable
• HF Frequency: 7kHz/14kHz (selectable)