Manley Dual Mono Tube DI Direct Injection Box With Dual Channel Eq

Dual Mono Tube DI Direct Injection Box With Dual Channel Eq description:

The Manley DUAL MONO TUBE DI With Dual Channel Eq. A dual DI box of the highest order, generates warmth with powerful tone control.

The Manley DUAL MONO TUBE DI features exceptionally clean and quiet tube circuits which will warm up any electric guitar, bass, violin, and especially those sterile sounding synths. Unique with the Manley Tube DI's is the added 5-position high pass shelf EQ, there to fight unwanted resonances. As splitter devices, the transformer-coupled balanced XLR output can be sent directly to a mic level input, such as through your console channel, while the 1/4 inch output drives the guitar amplifier cabinet which can be miked and mixed with the direct feed. Low impedance outputs, Ground lift and Console Out Boost switches make these units both versatile and compatible. Keep your Manley DI close at hand to get that noisy high impedance guitar cable into quiet lo-Z territory fast.

The main features of the Manley DUAL MONO TUBE DI include:

• A dual DI box of the highest order, generates warmth with powerful tone control
• Vacuum Tube: 5751
• Gain: -6dB or -26dB
• Input Z: 10 M ohm to 1 M ohm
• Output Z: 150 ohm xfmr note: requires mic pre amp on next device
• Frequency response: 12 Hz - 15KHz (-3dB)
• EQ: LF rolloff -3dB points: 12, 42, 100, 250Hz
• Transformer-Coupled Balanced XLR Output
• Console Out Boost Switch
• Ground Lift Switch
• Factory set for 100V, 120V or 220-240VAC operation for original destination country's mains voltage.
• Operating Mains Voltage changeable with power transformer re-wiring and fuse value change.
• Mains Voltage Frequency: 50~ 60Hz
• Mains power consumption Stereo Tube DI: 0.0750 Amps (75 milliamps = 75mA) @ 120V = 9 Watts, 0.0375 Amps (37.5 milliamps = 37.5mA @ 240V = 9 Watts