DPA 3532-SP Omnidirectional Large Diaphragm Condenser Microphone Stereo A-B Kit

3532-SP Omnidirectional Large Diaphragm Condenser Microphone Stereo A-B Kit description:

The 3532-SP is a complete state-of-the-art A-B Stereo Kit with two 4041-SP microphones, carefully matched within 1dB on both frequency response, sensitivity and self-noise. It is the ultimate choice for the demanding engineer and audio purist who emphasises clarity, openness, precision, low self-noise and high sensitivity.

The kit is designed for a broad range of uses, like as main pair for classical, jazz and folk genres, grand pianos, guitars, overheads or close-miking drums, choirs, strings, wind instruments and much more. You get a bright and transparent sound quality with lots of headroom. With its on-axis soft boost, the 4041-SP omni microphone can be angled to use as a natural equalizer.

Besides the paired microphones, the briefcase contain a stereo boom, holders and windscreens.

Features:

• SPL handling capability of 134 dB SPL
• The 4041-SP is superbly quiet, allowing it to capture the nuances of the recording space beautifully
• A-B stereo (when used as a pair) with warmth and depth - often lacking in small-capsule designs
• Great for miking choirs, strings and other acoustic instruments with large dynamics
• 2 x DUA0040 Windscreen for 4041, 1 x KE3532 Briefcase with foam insert for 3532, 1 x UA0837 Stereo Boom excluding Holders, 2 x 4041-SP Large Diaphragm Microphone, P48 included

Specifications:

• Principle of operation: Pressure
• Cartridge type: 24 mm (1 in) condenser w. stainless steel diaphragm
• Power supply: 48 V Phantom power
• Frequency range, ± 2 dB: 20 Hz - 20 kHz with 4 - 6 dB soft boost at 8 kHz
• Directional characteristics: Omnidirectional
• Equivalent noise level A-weighted: Max. 8 dB(A) re. 20 µPa
• Equiv. noise level ITU-R BS.468-4: Max 20 dB
• Capsule diameter: 24 mm (1 in)
• Total harmonic distortion (THD): <0.5% up to 120 dB SPL peak, <1% up to 126 dB SPL peak
• Preamplifier frequency range: 20 Hz- 50 KHz ±0.5 dB
• Output impedance: <200 Ohm
• Cable drive capability: Up to 100 m (328 ft)
• Microphone length: 170 mm (6.69 in)
• Max. SPL, peak before clipping: 134 dB
• Weight: 190 g (6.7 oz)
• Dynamic Range: Typ. 118 dB
• S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 86 dB
• Connector: 3-pin XLR-M (Standard P48)
• Sensitivity, matched within 1 dB: 50 mV/Pa: -26 dB re. 1 V/Pa