DPA 3541

Omnidirectional Large Diaphragm Microphone Kit-Single

3541 description:

The DPA 3541 Omnidirectional Large Diaphragm Microphone Kit - Single. Designed for demanding studios where transparency, clarity and brightness are paramount.

The DPA 3541 is a complete microphone kit for all kinds of high quality soloist recordings. It is specially designed for the demanding requirements of everyday use in the recording studio where transparency, clarity and brightness are paramount. With the Type 3541, DPA Microphones introduce a completely new and highly versatile modular capsule and preamplifier system. The omnidirectional microphone capsule module MMC4041 features extremely high sensitivity and low self noise. You will experience total transparency of this microphone no matter if you choose the high voltage solid state preamplifier MMP4000-S or tube preamplifier MMP4000-T2. All modules are packed in a convenient Samsonite carrying case with a shock mount, a pop-filter, windscreen and cable in addition to the Microphone Amplifier HMA5000. A highly cost effective solution for the discerning recording studio, producer or musician with focus on quality.

The main features of the DPA 3541 include:

Principle of operation: Pressure
Cartridge type: 24 mm (1 in) condenser w. stainless steel diaphragm
Power supply: 130 V via HMA5000
Frequency range, ± 2 dB: 10 Hz - 20 kHz with 4 - 6 dB soft boost at 8 kHz
Directional characteristics: Omnidirectional
Equivalent noise level A-weighted: Max. 10 dB(A) re. 20 µPa
Equiv. noise level ITU-R BS.468-4: Max. 22 dB
Total harmonic distortion (THD): <0.5% up to 120 dB SPL peak, <1% up to 126 dB SPL peak
Preamplifier frequency range: 20 Hz to 50 kHz (±0.2 dB)
Output impedance: Matches HMA5000 input
Cable drive capability(With HMA5000): Up to 300 m (984 ft)
Microphone length: 170 mm (6.69 in)
Max. SPL, peak before clipping: 144 dB
Weight: 190 g (6.7 oz)
Dynamic Range: Tube preamp - Typ. 117 dB
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): Tube preamp - 85 dB
Connector: 7-pin modified XLR-M (High Voltage)
Sensitivity, nominal +/- 2dB: 85 mV/Pa
The DPA 3541 Kit Includes: 1 x MMP4000-T2 Tube Preamplifier for MMC4041 (130 V), 1 x MMP4000-S Solid State Preamplifier for MMC4041 (130 V), 1 x UA0897 Shock Mount, 1 x MMC4041 Large Diaphragm Capsule, 1 x KE3541 Briefcase with foam insert for 3541, 1 x HMA5000 High-Voltage Microphone Amplifier (2-channel), 1 x DUA0090 Pop-filter, 1 x DUA0040 Windscreen for 4041 and 1 x DAO4110 Microphone Cable for 4041-S/-T, 10m (32,8 ft)