DPA 4011-TL Transformerless Cardioid Condenser Microphone

4011-TL Transformerless Cardioid Condenser Microphone description:

The DPA 4011-TL Phantom Powered Transformerless Cardioid Microphone. Highly regarded by engineers for its very high SPL capability and totally faithful reproduction of the original sound.

The DPA 4011-TL cardioid microphone is an upgraded version of the classic DPA 4011 renowned in recording studios all over the world as an exceptional mic. State-of-the-art components have been carefully selected to provide optimal neutrality, accuracy and extremely low distortion. The first order cardioid pick-up pattern gives superb separation between sound sources while spot-miking on every kind of live music. The 4011TL is equally suitable for close-up work on acoustic guitar, grand piano, overheads, percussion, wind instruments and vocals. It can handle incredibly high sound levels and even includes a 20 dB pad switch to attenuate the output of the microphone. A flat on axis frequency response and excellent phase response deliver a totally faithful reproduction of the original sound. The off-axis response is similarly smooth so that any leakage is an accurate reflection of the original, though attenuated according to the true first-order cardioid pick-up. The feeling of being there will always be more intense with the 4011-TL than with any other cardioid.

The main features of the DPA 4011-TL include:

• High SPL Capability - 158dB
• Great for spot-miking on every kind of live music
• Often used for close-up work on acoustic guitar, grand piano, overheads, percussion, wind instruments and vocals
• Principle of operation: Pressure gradient
• Cartridge type: 19 mm (0.75 in) pre-polarised condenser
• Power supply: 48 V Phantom power
• Frequency range, ± 2 dB: 40 Hz - 20 kHz
• Directional characteristics: Cardioid
• Equivalent noise level A-weighted: Typ. 19 dB(A) re. 20 µPa (max. 20 dB(A))
• Sensitivity, nominal, ±2 dB: 10 mV/Pa; -40 dB re. 1 V/Pa
• Equiv. noise level ITU-R BS.468-4: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
• Capsule diameter: 19 mm (0.75)
• Total harmonic distortion (THD): <0.5% up to 110 dB SPL peak, <1% up to 116 dB SPL peak
• Preamplifier frequency range: 20 Hz to 40 kHz -3 dB (loaded with 2x10 kOhm// 10 nF - equivalent to 100 m cable)
• Output impedance: <200 Ohm
• Cable drive capability: Up to 100 m (328 ft)
• Microphone length: 175 mm (6.89 in)
• Max. SPL, peak before clipping: 158 dB
• Weight: 165 g (5.82 oz)
• Dynamic Range: Typ. 97 dB
• Switchable attenuator: 0 dB, -20 dB
• S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 75 dB(A)
• Connector: 3-pin XLR-M (Standard P48)
• Includes the Accessories: 1 x UA0961- Microphone Holder, 1 x UA0896 - Windscreen for 4011/12/15/16