DPA 4007

High Spl Omnidirectional Microphone

4007 description:

The DPA 4007 High Spl Omnidirectional Microphone. Total acoustical transparency and ultra-high SPL handling capability.

The DPA 4007 High-SPL Omnidirectional Microphone Type is a phantom powered (P48) close miking specialist with an extremely linear on-axis frequency response from 20Hz to 40kHz (2dB). This high- performance condenser microphone has an unbeatable dynamic range of 124dB from the noise floor to 1% THD and is capable of handling up to 155dB SPL peak before clipping occurs. The Type 4007 has through its total acoustical transparency and ultra-high SPL handling capability gained a reputation as being the first choice for picking up drums, percussion and brass instruments, whenever the natural and non-distorted result is paramount. Type 4007 is, due to its linear qualities, also used as reference microphone in both microphone comparisons and acoustic test equipment. The DPA 4007 is an industry favorite in recording and sound reinforcement applications whenever the natural, non-distorted result is paramount.

The main features of the DPA 4007 include:

Extreme Peak Handling Capability - The 4007 is an excellent choice for close capturing drums, percussion, brass, guitar cabinets and more
UA0658 Windscreen for 4004/07 and UA0639 Microphone Clip included
Linear Frequency Response - The exceptional linear frequency response results in accurate, transparent signal reproduction regardless of mic position
Principle of operation: Pressure
Cartridge type: 16 mm (0.63 in) pre-polarised condenser
Power supply: 48 V Phantom power
Frequency range, ± 2 dB: 20 Hz - 40 kHz
Directional characteristics: Omnidirectional
Equivalent noise level A-weighted: Typ. 24 dB(A) re. 20 µPa (max. 26 dB(A))
Sensitivity, nominal, ±2 dB: 2.5 mV/Pa; -52 dB re. 1 V/Pa
Equiv. noise level ITU-R BS.468-4: Typ. 36 dB (max. 38 dB)
Capsule diameter: 12 mm (0.47)
Total harmonic distortion (THD): <0.5% up to 142 dB SPL peak, <1% up to 148 dB SPL peak
Preamplifier frequency range: 20 Hz to 40 kHz ±1 dB
Output impedance: <75 Ohm
Cable drive capability: Up to 300 m (984 ft)
Microphone length: 165 mm (6.5 in)
Max. SPL, peak before clipping: 155 dB
Weight: 150 g (5.29 oz)
Dynamic Range: Typ. 124 dB
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 70 dB
Connector: 3-pin XLR-M (Standard P48)