DPA 4022 Compact Cardioid Condenser Microphone with Rear Cable

4022 Compact Cardioid Condenser Microphone with Rear Cable description:

The Type 4022 is a phantom powered (P48) condenser microphone using the same type of cartridge as the famous Type 4011, but is preamplified using a build-in ultra-small thick-film mounted FET-preamplifier. The 4022 has its cable (3 m as standard) rear-mounted, for situations where the microphone needs to be suspended from its own cable or mounted on a stand.

The linear frequency response from 40 Hz to 20 kHz (±2 dB) together with the ultra-small design makes Type 4022 the perfect choice for all kinds of spot miking situations in TV studios or concert halls where near invisibility has to go hand in hand with studio quality audio.

Features:

• The world's smallest studio quality condenser microphone
• Highly respected and often the standard choice for Cello, Violin, Viola, Bass, Tuba, Piano also XY/ORTF recording, Broadcast Spot placements
• High SPL capability
• Male XLR connector - runs off 48v Phantom power
• DUA0020 Windscreen and SM4000 Suspension Mount included

Specifications:

• Principle of operation: Pressure gradient
• Cartridge type: 19 mm (0.75 in) pre-polarised condenser
• Power supply: 48 V Phantom
• Frequency range, ± 2 dB: On-axis: 40 Hz - 20 kHz
• Directional characteristics: Cardioid
• Equivalent noise level A-weighted: Typ. 20 dB(A) re. 20 µPa
• Sensitivity, nominal, ±2 dB: 7 mV/Pa (at 1 kHz)
• Equiv. noise level ITU-R BS.468-4: Typ. 25 dB (max. 28 dB)
• Capsule diameter: 19 mm (0.75 in)
• Total harmonic distortion (THD): <0.5% up to 110 dB SPL peak, <1% up to 116 dB SPL peak
• Output impedance: <300 Ohm
• Cable drive capability: Up to 100 m (328 ft)
• Microphone length: 31 mm (1.22i n)
• Max. SPL, peak before clipping: 145 dB
• Weight: 27.5 g (0.97 oz) (without cable)
• Dynamic Range: Typ. 96 dB
• S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 74 dB(A)
• Connector: 3-pin XLR-M (Standard P48)