DPA 4052

4052 description:

The Type 4052 is an omnidirectional phantom powered (P48) condenser microphone using the same type of cartridge as the famous Type 4006, but is preamplified using a build-in ultra-small thick-film mounted FET- preamplifier, which enables the cartridge to be mounted on a extremely compact microphone housing. The 4052 has its cable mounted behind the microphone axis for situations where the microphone needs to be suspended from its own cable.

The linear on-axis frequency response from 20Hz to 20kHz (2dB) together with the ultra- small design makes Type 4052 the perfect choice for all kinds of on-camera or on-stage use where high definition audio is of high priority. These Compact Omnis are extremely popular as A-B Stereo pairs in concert halls where the beautiful architecture has to go hand in hand with quality recordings.

Features:

• Compact Size
• Clean transparent sound
• Wide dynamic range
• Low distortion
• Low noise floor
• High sensitivity
• Highly respected for acoustic Instruments, XY/ORTF recording, Broadcast Spot placements
• Male XLR connector - runs off 48v Phantom power
• DD0254 - Close-miking Grid, Trapezoid, Silver, SM4000 - Suspension Mount, DD0297 - Diffuse-field Grid, Black

Specifications:

• Principle of operation: Pressure
• Cartridge type: 16 mm (0.6 in) pre-polarised condenser
• Power supply: 48 V Phantom power
• Frequency range, ± 2 dB: On-axis: 20 Hz - 20 kHz
• Directional characteristics: Omnidirectional
• Equivalent noise level A-weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
• Sensitivity, nominal, ±2 dB: 30 mV/Pa; -30 dB re. 1 V/Pa
• Equiv. noise level ITU-R BS.468-4: Typ. 27 dB (max. 29 dB)
• Total harmonic distortion (THD): <0.5 % THD up to 125 dB SPL peak, <1 % THD up to 131 dB SPL peak
• Output impedance: <300 Ohm
• Cable drive capability: Up to 100 m (328 ft)
• Microphone length: 19 mm (0.75 in); 38 mm (1.5 in) (incl. cable relief)
• Max. SPL, peak before clipping: 135 dB
• Weight: 22 g (0.78 oz) (without cable)
• Dynamic Range: Typ. 116 dB
• S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 79 dB(A)
• Connector: 3-pin XLR-M (Standard P48)