DPA 4060

4060 description:

The 4060-BM is the black version of the Miniature Microphone Type 4060. This type is a prepolarized omnidirectional Miniature Condenser Microphone with a 5.4mm vertical diaphragm specially designed for maximum performance under the often difficult conditions when mounted directly on the human body. The utmost attention has been paid to the microphone's resistance to humidity. A double vent protection system together with water resistant materials inside the microphone make it more than difficult for moisture to cause the Miniature Microphone to fail. By changing the protection grids, the Miniature Microphones can furthermore be acoustically modified according to the placement of the microphone on the body.

The Miniature Microphone's size taken into consideration DPA has obtained an outstanding noise floor of 23dB(A) re. 20 Pa and an impressive sensitivity of 20mV/Pa and if powered correctly, the microphone will be able to handle sound pressure levels up to 134dB SPL before clipping occurs. A wide range of connection adapters makes it possible to use the Miniature Microphones with close to any professional wireless systems available plus 48 V Phantom.

Features:

• Low Noise floor - slightly lower than the 4061
• High SPL Capabilities for a miniature microphone
• Flexible microphone used for acoustic bass, Flute, Cello etc and of course for speech in Broadcast, Stage and Television
• DUA6002 Miniature Grids, High Boost, Black, 5 pcs and DUA6001 Miniature Grids, Soft Boost, Black, 5 pcs included

Specifications:

• Principle of operation: Pressure
• Cartridge type: Pre-polarised condenser element with vertical diaphragm
• Power supply: Min. 5 V - max 50 V through DPA adapter
• Frequency range, ± 2 dB: Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz, High boost grid: 20 Hz - 20 kHz ±2 dB, 10 dB boost at 12 kHz
• Directional characteristics: Omnidirectional
• Equivalent noise level A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
• Equiv. noise level ITU-R BS.468-4: Typ. 35 dB (max. 38 dB)
• Total harmonic distortion (THD): <1% THD up to 123 dB SPL peak
• Preamplifier frequency range: 20 Hz to 50 kHz (+0 dB/-3 dB)
• Output impedance: 30 - 40 Ohm
• Cable drive capability: Up to 300 m (984 ft)
• Microphone length: 12.7 mm (0.5 in)
• Max. SPL, peak before clipping: 134 dB
• Weight: <7.5 g (0.26 oz) incl. cable and MicroDot connector
• Cable length: 1.8 m (5.9 ft)
• Cable colour: Black
• Dynamic Range: Typ. 100 dB
• S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 71 dB(A)
• Connector: MicroDot
• Sensitivity, nominal, ±3 dB: 20 mV/Pa; -34 dB re. 1 V/Pa