Sennheiser K 6-P Phantom Powering Module at DV247.COM

At the heart of Sennheiser’s professional modular condenser microphone system. The K6P can be combined with various microphone heads to produce microphones with a variety of pick-up patterns.

K 6-P Phantom Powering Module description:

The K6-P powering module is at the heart of Sennheiser's professional modular condenser microphone system. It is similar to the K6 powering module but is powered by 12 - 48 V phantom power only, for use where battery power is not required (e.g. permanent installations). The K6P can be combined with various microphone heads to produce microphones with a variety of pick-up patterns. Matt black, anodised, scratch-resistant finish.

Features:

Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
On/off switch
High output, low noise
Transformerless balanced output on 3-pin XLR connector
Included items: 1 K6P powering module, 1 MZQ 200 microphone clamp, 1 protective carrying case

Specifications:

Nominal impedance: 200 Ohm, symm.
Min. terminating impedance: 1000 Ohm
Output voltage: 2 V (1 kHz)
Power supply: Phantom 12 - 48 V
Current consumption: 2.2 mA
Dimensions: d 22 x 52 mm (netto)
Gain: 0 dB

Sennheiser K 6-P Phantom Powering Module (code 21889)
At the heart of Sennheiser’s professional modular condenser microphone system. The K6P can be combined with various microphone heads to produce microphones with a variety of pick-up patterns.
£140.99 (inc vat)