DPA 3530 Stereo 4006 Mic Kit with Accessories Matched Pair

3530 Stereo 4006 Mic Kit with Accessories Matched Pair description:

The DPA 3530 STEREO 4006 MIC KIT A B Stereo Kit With Accessories. Superb matched pair of 4006 omnis with all the accessories.

The DPA 3530 STEREO 4006 MIC KIT is a complete 4006 Stereo Kit with two carefully factory-matched phantom powered (P48) condenser microphones. The 3530-A also includes a Stereo Boom and the complete range of DPA Acoustic Modification Accessories, all in a sturdy carrying case with a foam insert. The specially selected microphones Type 4006 are matched within 1 dB on both frequency range, sensitivity and self noise. The maximum phase response difference from 50 Hz to 20 kHz is 10 degrees. The high sensitivity, the low noise-floor and the extremely linear frequency response from 20 Hz to 20 kHz (+/- 2 dB) of the microphone pair makes the DPA 3530-A the perfect choice for all professional A-B Stereo recordings.

The main features of the DPA 3530 STEREO 4006 MIC KIT include:

• High SPL Handling - The DPA 4006 features an SPL rating of 143dB, allowing the microphone to capture high transients without peak distortion
• Flat Frequency Response - The linear frequency response of 20Hz to 20kHz makes the microphone suitable for use in a wide variety of applications
• Omni-directional Polar Pattern - The omni-directional pattern provides a generous, even signal response at the direct and off-axis sections of the microphone
• Versatile - excellent for A-B Stereo recordings (pair), voice capturing, ambient/environmental and instrument recording
• Principle of operation: Pressure
• Cartridge type: 16 mm (0.75) pre-polarised condenser
• Power supply: 48 V phantom power
• Frequency range, +/- 2 dB: 20 Hz - 20 kHz
• Directional characteristics: Omnidirectional
• Equivalent noise level A-weighted: Typ. 15 dB(A) re. 20µPa (max. 17 dB(A))
• Sensitivity, matched within 1 dB: 10 mV/Pa; -40 dB re. 1 V/Pa
• Equiv. noise level ITU-R BS.468-4: Typ. 27 dB (max. 29 dB)
• Capsule diameter: 16 mm (0.75 in)
• Total harmonic distortion (THD): less than 0.5% up to 129 dB SPL peak, les than 1% up to 135 dB SPL peak
• Preamplifier frequency range: 20 Hz to 40 kHz +/- 1dB
• Output impedance: less than 75 Ohm
• Cable drive capability: Up to 300 m (984 ft)
• Microphone length: 165 mm (6.5 in)
• Max. SPL, peak before clipping: 143 dB
• Weight: 5.8 kg (12.8 lbs) (complete kit)
• Dynamic Range: Typ. 120 dB
• S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 79 dB
• Connector: 3-pin XLR-M (Standard P48)
• Matching tolerance (frequency response and sensitivity): +/- 0.5 dB (20 Hz - 20 kHz)
• Current consumption: 3.40 mA
• Includes the Accessories: 2 x DD0254 Close-miking Grid, Trapezoid, Silver. 1 x UA0836 Stereo Boom with Holders. 2 x UA0777 Nose Cones. 2 x UA0638 Windscreens for 4003/06. 2 x L50B Acoustic Pressure Equaliser, 50 mm (1.97 in) Ball. 2 x L40B Acoustic Pressure Equaliser, 40 mm (1.57 in) Ball. 2 x L30B Acoustic Pressure Equaliser, 30 mm (1.18 in) Ball. 2 x DD0297 Diffuse-field Grid, Black. 2 x DD0251 Free-field Grid, Silver. 2 x 4006 Omnidirectional Microphones, P48