DPA ENG/EFP

ENG/EFP description:

The EMK4071 ENG/EFP microphone kit is made for use, when the microphone is allowed to be visible. The kit contains a 4071-BM miniature microphone (pre-equalized for speech clarity) and various fixtures for the microphone. Included is an XLR adaptor with midrange attenuation (DAD6024), which is the final tonal adjustment needed for going directly on air or to tape without editing. A combination of 4071 and DAD6024 makes voices more distinguishable and improves speech intelligibility and definition.

The 4071-BM features a specially designed, fixed microphone grid with a soft presence boost of typically 5 dB at 4 - 6 kHz. Speech intelligibility, clarity and definition of voices and instruments lie within the area that the 4071 grid boosts. While clarity seems to be missing from chest-worn microphone placement, the 4071 will make voices cut through. Typical applications are ENG/EFP use on the reporter in studio or in the field, or film production use, with hidden microphone placements on the actors.

The kit is delivered in a sturdy, hard case with a transparent lid.

Features:

• Acoustical Low-cut feature enables larger headroom
• Ideal for the Reporter in the studio or the field
• Widely used in film production use, with hidden microphone placements on the actors
• Adapters for all wireless systems
• A combination of DAD6024 (included 800Hz attenuator/XLR adapter) and the 4071 Miniature Microphone makes your recording capable of going directly to tape or on air without editing
• High SPL Capabilities for a miniature microphone
• Clean transparent sound
• Wide dynamic range

Specifications

• Principle of operation: Pressure
• Cartridge type: Pre-polarized condenser element with vertical diaphragm
• Power supply: Via the XLR (included) or alternative Adapter/powering System from DPA Microphones
• Frequency range: 100 Hz - 15 kHz with 5 dB soft boost at 4-6kHz
• Directional characteristics: Omnidirectional
• Equivalent noise level A-weighted: Typ. 26dB(A) re. 20Pa (max. 28dB(A))
• Sensitivity: Nominally 6 mV/Pa 3dB at 1kHz; -44.4 +/- 3 dB re. 1 V/Pa
• Equiv. noise level ITU-R BS.468-4: Typ. 38dB (max. 40dB)
• Capsule diameter: 5.4mm
• Total harmonic distortion (THD): 123dB SPL peak (<1% THD); 120dB SPL sine (<1% THD)
• Preamplifier output impedance: 30-40 Ohm
• Preamplifier cable drive capability: Up to 300m
• Microphone length: 17mm
• Maximum sound pressure level: 144dB SPL before clipping
• Weight: 9g incl. cable and MicroDot connector
• Cable length: 1.8m (5.9ft)