Sennheiser SKP 500 Plug-On Transmitter

SKP 500 Plug-On Transmitter description:

The Sennheiser SKP 500 G2 plug-on transmitter, converts any wired microphone to wireless. It features switchable 48V phantom powering for condenser microphones. The plug-on transmitter can be combined with any of the receivers from the EW 500 G2 Series (EM 500 G2 / EK 500 G2) or the EM 550 G2. It features nine frequency banks with up to 20 directly accessible presets each – ready for immediate use.

A great feature of the Evolution range is the ability to expand the systems uses and power. There are many additional microphones, bodypack cable convertors and signal boosters available for you to get the right microphone with the right power for your performance.

Importantly, this UHF transmitter uses band E: Range 830 - 866 MHz, so you will always have a frequency available throughout Europe (except Greece) without requiring any licence.

Sennheiser SKP 500 G2 Features:

• 1440 tunable UHF frequencies for interference-free reception
• Absolutely reliable transmission and extended range due to high RF output power
• Pilot tone squelch for eliminating RF interference when transmitter is turned off
• Switchable 48 V phantom powering
• Backlit display (lights up when a button is pushed)
• Lock function avoids accidental changing of settings
• HDX compander for crystal-clear sound
• 4-step battery status display, also transmitted to receiver
• Mute function
• Wide range of accessories adapts the plug-on transmitter to any requirement
• SKP 500 G2 plug-on transmitter, POP 1 protective pouch, 2 x batteries and Operating instructions included with this product

Sennheiser SKP 500 G2 Specifications:

• RF frequency Range E: 830 - 866 MHz. Frequencies between 863 to 865 MHz (ISM) are an ETS agreed licence exempt band. Use of any other frequency is likely to require a licence (country dependant)
• Transmission/receiving frequencies: 1440 (max. 20 Presets)
• Switching bandwidth: 36 MHz
• Peak deviation: +/- 48 kHz
• Compander: HDX
• Frequency response (microphone): 40 - 18000 Hz
• Signal-to-noise ratio: 115 dB(A)
• THD, total harmonic distortion: 0.9 %
• In compliance with ETS 300422 , ETS 300445 , CE , FCC
• Audio-XLR connector: XLR-3 female
• Power supply: 2 x 1,5 V (AA)
• RF output power: 30 mW
• Operating time (transmitter): 8 h (P48: 5h)
• Input voltage range mic: 1.2 V max
• Dimensions (Transmitter): 105 x 43 x 43 mm
• Weight (Transmitter): 195 g

The Sennheiser SKP 500 G2 plug-on transmitter, converts any wired microphone to wireless.