Shure EZG/18 Easyflex Gooseneck Microphone

EZG/18 Easyflex Gooseneck Microphone description:

The Easyflex line of miniature gooseneck condenser microphones are the perfect choice to capture speech and vocals in environments where quality, value and budget are primary considerations. The gooseneck condenser microphones feature a cardioid polar pattern, and are available in four different models, dependent on height and mounting application.

Available in either 12" or 18" lengths, each charcoal gray microphone comes standard with a single flexible gooseneck section for ease in accurate positioning, as well as a matching slip-on foam windscreen. Choose a locking flange mount with an integrated preamplifier and XLR connector for easy permanent install. Or choose side-exit mounting with 10-foot cables, in-line preamplifiers and threaded mounting flanges - easily adaptable to a standard mic stand.

Like all Shure products, the Easyflex line is extensively and rigorously tested for quality in operation and performance in real-life environments to be reliable and consistent in performance. For ease of your sound reinforcement requirements in auditoriums, AV applications, boardrooms, houses of worship and schools, look no further than the wide frequency range and high sensitivity of the Easyflex family for solid performance at an affordable price.

Features:

• Single gooseneck section near microphone base for easy orientation of the microphone.
• Tubular preamp body sized to fit many standard accessories.
• Slide on windscreen.

Specifications

• Frequency Response: 50 to 17,000 Hz
• Polar Pattern: Cardioid
• Output Impedance (at 1 kHz): Rated at 150 ohms (180 ohms actual)
• Open Circuit Sensitivity (at 1 kHz, ref. 1 V/Pascal): –45.7 dB (5.19 mV)
• Maximum SPL (1 kHz at 1% THD, 1 kHz load): 129 dB
• Equivalent Output Noise (A-weighted): 29 dB SPL
• Signal to Noise Ratio (referenced to 94 dB SPL): 65 dB
• Dynamic Range (at 1 khz Load): 100 dB
• Common Mode Rejection: 45 dB minimum
• Preamplifier Output Clipping Level (1 kHz at 1% THD, 1 khz load): –12.0 dBV (0.25 V)
• Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
• Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
• Environmental Requirements: Operating Temperature Range: –18° C to 57° C (0° F to 135° F), Relative Humidity: 0 to 95%
• Dimensions: Gooseneck: 18" (457 mm), Head Diameter: 0.46" (11.68 mm)