Shure 515BSM Unidirectional Dynamic Paging Microphone

515BSM Unidirectional Dynamic Paging Microphone description:

The Shure 515BSM is a low-impedance, dynamic microphone designed for hand-held or fixed use. The unidirectional (cardioid) pickup pattern provides excellent reproduction of voice and effective rejection of feedback.

The Shure 515BSM microphones are supplied with a push-to-talk switch and a four-conductor, retractable cable (2 shielded conductor).

The Shure 515BSM is especially suitable for use in paging systems, public speaking, stage performance, and public address systems. They are also highly recommended for other applications requiring both hand-held and fixed installation operations. The microphones are wired with the microphone circuit normally open for use in parallel microphone installations.

Shure 515BSM Features

• Frequency response optimized for announcing, narration, and paging applications
• Cardioid pickup pattern: symmetrical about axis
• Neodymium magnet for high signal-to-noise ratio
• Shock-mounted cartridge for quiet operation and low stand/handling noise
• Tough diecast, locking grille and handle resist wear from constant use and handling
• Built-in push-to-talk switch controls both microphone
• circuit and relay or control circuit

Shure 515BSM Specifications

• Type: Dynamic (moving coil)
• Frequency Response: 80 to 15,000 Hz
• Impedance: 150 Ω rated (180 Ω actual)
• Output Level (at 1,000 Hz): Open Circuit Voltage*: –57.0 dBV/Pa (1 Pa=94 dB SPL) (0.14 mV)
• Switch: Built-in, leaf-type, non-locking, push-to-talk
• Shock Mount: Internal rubber vibration isolator
• Cable: Highly durable, retractable cable with effective hum shielding, four conductors (two shielded), neoprene jacketed with 5-pin connector
• Cable Length: 330 mm (13 in.) retracted, 1.83 m (6 ft) extended
• Body: Silver coloured finish die casting with black enamel diecast grille and stainless steel screen
• Certification: Conforms to European Union directives, eligible to bear CE marking; meets European Union EMC Immunity Requirements (EN 50 082–1, 1992).
• Connections: 5-Pin connector, Low Impedance, designed for connection to microphone inputs rated at 75 to 300 ohms.
• Net Weight 515BSM: 380 g (13.5 oz)