Vestax CDX-05MBK Professional DJ Single CD Player

CDX-05MBK Professional DJ Single CD Player description:

The Vestax CDX-05 is a user friendly but Professional single CD player that carries all the functions as any other but with Vestax's original features and functions. With a layout for the DJ, whether mix or scratch, the Vestax CDX-05 will answer your needs. Attach it to the Tascam TT-M1 unit, the only single player CD unit compatible to the Tascam piece will allow you to convert your turntable to the CD, to control the CD via your turntable!

Features:

• MP3 READABLE - MP3 tracks can be played with the MP3 encoder that iss built in to the CDX-05. The features that you could only do on computers such as scratching, +/-100% pitch control, effectors and sampling can all be done on the CDX-05.
• SCRATCH MODE VIA JOG WHEEL - The operation interface is a jog wheel that can be used for scratching, pitch bending, rewinding and cueing. If you are not satisfied with scratching on the jog wheel, you can connect the TASCAM TT-M1(úU2) to the TT-LINK terminal on the rear panel, and mount it on any PDX series turntable. Once itfs connected you can scratch the record on the turntable to scratch the CD.
• DISC MEMORY - Track programs, cue points and loop points can be memorized up to 100 tracks and if you play a CD that has been played before, the CDX-05 reads the CDs TOC info and plays it the way it was set before. (Recordable info: DISC ID, CUE POINT, LOOP POINT, BREAK, MASTER TEMPO, PLAY MODE, TAP VALUE)
• INDEPENDENT SAMPLER - Maximum of 8 seconds sampling, with ability to layer the sound over the playing track. CDfs can be changed without fading the outro, by using the sampling loop function.
• CUE SYSTEM - 4 cue points can be set out via 2 means of selection (last start position or pause position). CUE 1,2,3 can be played instantly with the CUE play mode like using a sampler.
• PITCH CONTROL&MASTER TEMPO - The pitch can be controlled with the 100mm pitch control fader, 0,+/-6,10,50,100% for long mixing and sound effects so any tracks and styles can be mixed. Master tempo can be adjusted to +/-50%.
• CDX-05 and TTT-M1 - It sends the platter rotation speed and start/stop info to the CDX-05, and controls the digital data of the CD.