Shure PGX14 Guitar Wireless System

PGX14 Guitar Wireless System description:

The Shure PGX Series wireless microphone systems combine the convenience of single touch remote channel setup with the reliability of a diversity UHF design. Created for active musicians and presenters who also manage their own sound, Shure PGX Wireless improves your performance and simplifies your setup. Innovations such as automatic frequency selection and automatic transmitter setup make wireless quicker and completely worry-free. Channel and frequency settings are remotely synchronized from the transmitter to the receiver via infrared. PGX systems now feature Shure’s patented Audio Reference Companding, delivering the crystal clear sound quality that pro audio engineers trust.

The PGX14 Instrument Wireless System includes the PGX4 receiver, PGX1 bodypack transmitter, WA302 Instrument Cable, 2 AA batteries, Power supply and User guide. An ideal system for guitars, keyboards or those looking for a flexible, expandable and Multi-Use system.

The PGX4 receiver operates over an 18MHz UHF bandwidth (846 - 865 MHz) with the flexibility of selecting up to 90 UHF frequencies. It is possible to run 9 of these systems simultaneously with their own channel selections. The diversity design enables dual internal receiver circuits to compete for the strongest possible reception, minimising noise and RF interference. The rear panel has both XLR and 1/4 inch phone outputs.

The PGX1 bodypack transmitter is light weight and durable, featuring a 4-pin mini input. The input is compatible with many of Shure's lavaliers, headsets and instrument microphones. A 3-position input level switch enables the microphone input to accommodate microphone, line and Guitar level signals. The transmitter operates up to 8 hours on 2 AA alkaline batteries.

PGX14 Features:

• The PGX14 System is Multi-Use and expandable. 3-position input level switch enables the bodypack transmitter input to accommodate microphone, line and Guitar level signals from any source using the supplied WA302 1/4 inch to mini 4-pin guitar cable or the optional WA310 Female XLR to mini 4-pin cable. Any Shure Microphone that has a 4-pin mini connector can be used and powered directly from the bodypack
• The Frequency Agile UHF design provides up to 90 selectable UHF frequencies that operate on an 18MHz UHF bandwidth
• Diversity Reception system uses twin receiver circuits to minimise noise and drop out caused by RF interference
• Hi quality sound with quick and easy setup using infrared remote synchronization of channel and frequency status
• Use 9 systems simultaneousy within the 846 - 865 Mhz range for big events
• PGX4 has XLR and unbalanced 1/4 inch jack audio outputs
• PGX1 includes battery power warning lights - 8 hours battery life from 2 x AA 1.5v alkaline batteries
• Rugged carry case and batteries included

PGX14 System Specifications:

• Working Range: 100m (300 ft.) Note: actual range depends on RF signal absorption, reflection, and interference
• Audio Frequency Response +/– 2 dB: Minimum: 45 Hz, Maximum: 15 kHz (Overall system frequency depends on microphone element.)
• Total Harmonic Distortion (Ref. +/– 33 kHz deviation, 1 kHz tone): 0.5%, typical
• Dynamic Range: 100 dB A-weighted
• Operating Temperature Range: –18 degrees C (0 degrees F) to +50 degrees C (+122 degrees F) Note: battery characteristics may limit this range
• Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output

PGX1/WA302 Specifications:

• The WA302 Instrument cable connects the PGX1 body-pack transmitter to a guitar or other instrument. It is 2.5 foot (.75 m), length with 1/4-inch plug and 4-pin mini connector (TA4F)
• Audio Input Level: -10 dBV maximum at mic gain position, +10 dBV maximum at 0dB gain position, +20 dBV maximum at -10dB gain position
• Gain Adjustment Range: 30 dB
• Input Impedance 1 M Ohm
• RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations)
• Dimensions 108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
• Weight: 81 grams (3 oz.) without batteries
• Housing: Molded polycarbonate case
• Power Requirements: 2 AA size alkaline or rechargeable batteries
• Battery Life: Around 8 hours (alkaline)

PGX4 Specifications:

• Dimensions: 40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)
• Weight: 327 g (11.5 oz.)
• Housing: ABS
• Audio Output Level (Ref. +/– 33 kHz deviation with 1kHz tone): XLR connector (into 600 Ohm load): –19 dBV, 1/4 inch connector (into 3000 Ohm load): –5 dBV
• Output Impedance: XLR connector: 200 Ohm, 1/4 inch connector: 1kOhm
• XLR output: Impedance balanced, Pin 1: Ground (cable shield), Pin 2: Audio, Pin 3: No Audio
• Sensitivity: –105 dBm for 12 dB SINAD, typical
• Image Rejection: 70 dB, typical
• Power Requirements: 12–18 Vdc at 150 mA, supplied by external power supply