Tech21 Sansamp PSA1.1 Guitar Analog Preamp

Sansamp PSA1.1 Guitar Analog Preamp description:

The exceptionally versatile SansAmp PSA-1.1 offers 49 factory presets of the most recognized vintage and modern tube amp sounds for guitar and bass, and 77 user-definable locations.

A Universal Output Section enables the signal to be compatible with full range systems as well as guitar/bass speaker cabinets. With the SansAmp PSA-1.1, you can record direct to tape, as well as warm up existing tracks in mixdowns. For live applications, it can be used as a pre-amp, “monster direct box” to P.A. system, and as an outboard processor. To program, you just tweak the knobs and save. Parameters are adjusted in real time with traditional analog potentiometers. The digital memory stores the positions of the pots. With 256 incremental steps, each rotary control increases and decreases in a smooth linear fashion.

SansAmp PSA-1.1 Features include:

• Input Impedance-Input 1 1MegOhm
• Input Impedance-Input 2 4.7MegOhm
• Input Level-Input 1 -10dB
• Input Level-Input 2 Switchable to -10dB or 0dB range
• Output Impedance-1/4” 1K Ohm min
• Output Impedance-XLRs 600 Ohm min
• Output Level-1/4” Switchable to -10dB or 0dB range
• Output Level-XLR Switchable to -10dB or 0dB range
• Maximum Output Level +10dB or better
• XLR Pin Configuration Pin 1: Ground / Pin 2: In phase / Pin 3: Reverse phase
• Effects Loop Send 1K Ohm min, -10dB, Mono
• Effects Loop Return 100K Ohm min, -10dB, Stereo/Mono
• Low Frequency Response 10Hz or better
• High Frequency Response Harmonic content, 20kHz or better
• Maximum Power Consumption 5 Watts
• AC Input Power (factory set) 100V, 117V, 230V, 240V
• Enclosure Aluminum and steel, fully shielded
• Dimensions 19.0”w x 1.75”h x 5”d / Overall depth: 6”
• Weight 5 lbs.