SE Electronics SE Mini M1C + Reflexion Filter

SE Mini M1C + Reflexion Filter description:

The sE Reflexion Filter is a ‘portable vocal booth’, a revolution in recording technology.

The Reflexion Filter is a portable device for recording live sources with reduced room ambience. It is an advanced composite wall which is positioned behind any microphone by means of a variable position stand clamp assembly which ships with the product. The main function is to help obtain a ‘dry’ vocal or instrument recording. This is especially useful in studios without proper acoustic treatment, but can also be used to help record takes in control rooms, where the performer also has to operate the recorder, or in rehearsal studios to reduce ambient noise.

The Reflexion Filter also helps prevent any reflected sound reaching the back and sides of the mic. Its shape and size have been carefully tested to maximize absorption while keeping ‘coloration’ down to only around 1dB, and leaving the microphone’s polar pattern unaffected. Stand not included.

The sE M1C is a single pattern Cardioid Condenser Microphone.

The sE M1C brings the advantages of the smooth classic sound of a high quality hand crafted condenser microphone within the reach of more users. It has a very high SPL, 130 dB, which makes this microphone a great all-rounder, from micing guitar cabs to main vocal tracks. An Aluminium flight case with ‘U-shaped’ stand clamp is included with this microphone

sE M1C Features:

• 1 inch Gold hand-crafted diaphragm
• Wide response
• Integral mount
• High SPL - 130 dB SPL rated
• Great for Voice, Electric Guitar, Acoustic string instruments, woodwind, brass, drums and percussion
• Custom designed integral shock-mount and Aluminum flight case included with this microphone
• Acoustical Operating Principle: Pressure gradient transducer
• Directional Pattern: Cardioid
• Frequency Range: 20 Hz to 20 kHz
• Sensitivity at 1 kHz into 1 k ohm: 20 mV/Pa
• Rated Impedance: 200 ohms
• Rated Load Impedance: 1000 ohms
• Equivalent SPL CCIR 468-3: 22 dB
• Equivalent SPL DIN/IEC 651: 13 dB-A
• S/N Ratio CCIR 468-3: 70 dB
• S/N Ratio DIN/IEC 651: 81 dB
• Maximum SPL for THD 0.5%: 130 dB
• Supply Voltage: 48 V +/- 4 V
• Current Consumption: 2 mA
• Connector: XLR 3 Male
• Weight: Approx. 745g
• Dimensions: Diameter: 64mm, Length: 144mm