Samson Airline AF1/AP1 Channel 3

Airline AF1/AP1 Channel 3 description:

The revolutionary Samson AirLine AF1/AP1 system consists of an AF1 "plug-in" guitar transmitter for traditional Strat-style inputs, and an AP1 pedal receiver.

Less than half the size of conventional body packs, the miniaturized Samson Airline AF1 transmitter runs on a tiny triple-A battery with 14-hour battery life. Featuring an array of on-board controls: A Power On/Off and Mute switch, red/green LED for Power On/Off, a Peak LED and an Input Level control for different pickups. And UHF (Ultra High Frequency) means clearer frequencies with less interference.

Designed for use with your compact effect pedals, the AP1 pedal receiver gives you reception you can always depend on. It features a 1/4" output jack, Power switch, Peak LED and a Volume control. You can use a 9 volt battery or an AC adapter to power the receiver. When you unplug your the unit, the battery is disabled to conserve power.

Samson AirLine AF1/AP1 main features include:

• UHF Frequency operation means less interference
• Strat-style angled Jack plug
• RF Output Power (5mW): -4dB Minimum, +3dB Maximum
• Frequency Stability: -40kHz Minimum, 40kHz Maximum
• Modulation Factor: 13kHz Minimum, 15kHz Typical, 17kHz Maximum, Input 1kHz-10dBv
• Maximum Input Level: +2 dBv
• Input Impedance: 2K ohms
• THD: < 2% (1 kHz deviation 15kHz)
• Audio Frequency Response: 50Hz - 15kHz (?3.5 dB)
• Operating Power Voltage: 1.5V Typical, 1.05V Minimum, 2V Maximum
• Current Consumption: 60mA Typical
• AF1 Output: 6.3mm, 1/4 in. mono Jack
• AF1 Antenna: Permanently attached 1/4 wave length wire
• AF1 Controls: Power Switch, 15 dB Pad Switch
• AF1 Indicators: Power On (LED Flash), Low Battery (LED On when battery less than 1.1V)