Fishman Aura Imaging Pedal Jumbo

Aura Imaging Pedal Jumbo description:

The Fishman AURA IMAGING PEDAL JUMBO Aura technology in compact pedal format for Acoustic Guitar. Accurately reproduce the sound of your acoustic instrument as miked in a professional studio.

The Fishman Aura Imaging Pedal Jumbo eliminates intrusive stage noise and expensive microphone setups, allowing you to reveal the true, unique voice of your instrument in any amplified performance. Each Aura Acoustic Imaging Pedal is matched to a specific body style. Fishman hand pick Images for each pedal from the most popular guitar and microphone combinations. Use this Jumbo pedal with large, deep-body instruments with slim waists and wide lower bouts (usually over 16 inches). Aura uses digital algorithms developed in Fishman’s audio laboratories to create an Image of the natural sound that your acoustic instrument emits when mic’d in a professional studio. This Image, when played through an amp, mixer or PA, blends with your instrument’s pickup to produce an immediate and dramatic improvement in your amplified sound. Aura Acoustic Imaging Pedals sound best with Fishman undersaddle pickups and magnetic soundhole pickups. Fishman do not recommend soundboard-mounted pickups, bridge-plate pickups, multi-sensor pickups or microphones for the Aura Imaging Pedal.

The main features of the Fishman AURA IMAGING PEDAL JUMBO include:

• Accurately reproduce the sound of your acoustic instrument as miked in a professional studio
• Each pedal pre-loaded with 16 of the best and most popular Aura images
• Designed for use with undersaddle or magnetic soundhole pickups
• Volume, blend and image select controls
• Feedback fighting phase switch
• Bypass/Mute footswitch
• Input Trim with Clip/Low Battery indicator
• Digital signal path - A/D, D/A conversion: 24 -bit
• Signal processing: 32 -bit
• Power supply: 9V alkaline battery or 9VDC adapter
• Typical in-use current consumption: 18mA
• Typical 9V alkaline battery life: 27 hours
• 9V adapter: Any suitable filtered and regulated, 9 Volt, 200mA type, tip = negative
• Input impedance: 10M Ohm
• Nominal output impedance: 3.5k Ohm
• Input trim gain range: -10dB to +2dB
• Maximum output level (onset of clipping): +2.4dBV
• Baseline noise: -92dBV (A-weighted)
• Dynamic range: 94dB (A-weighted)
• Phase switch: Left position = non-inverting