Rode NT2000 + FREE POP STOP

NT2000 + FREE POP STOP description:

The Rode NT2000 is a large diaphragm condenser studio microphone with seamlessly variable Polar Patterns, Filter and Pad located conveniently on the microphone body.

The NT2000’s state of the art surface-mount electronics combined with the new Australian designed and manufactured HF1 Capsule, provide extremely low self-noise (7 dBA) and a maximum SPL of 147 dB (157 dB with pad fully engaged) ensuring exceptional results and the ultimate in recording creativity.

The NT2000 is supplied with the SM2 Shock Mount, together in a durable custom carry case.

Features:

• New Type HF1 1” edge terminated, gold sputtered, dual 5 uM diaphragm
• Continuously variable pad
• Continuously variable high-pass filter
• Ultra low noise, transformerless SMT circuitry
• Wide dynamic range
• High strength welded and heattreated steel mesh head
• Durable satin nickel finish
• Internal capsule shock mounting
• Supplied complete with SM2 Shock Mount and RC1 Custom Carry Case
• Continuously variable polar patterns. From omni, through cardioid to figure of eight, controlled at the microphone

Specifications:

• Acoustic Principle: Externally polarised 25mm (1”) dual diaphragm
• Active Electronics: J-FET impedance converter with bipolar output buffer
• Pickup Pattern: Multi-pattern - Continuously variable from omni, through cardioid to figure of eight, controlled at the microphone
• Frequency Response: 20 Hz-20 kHz
• Output Impedance: 200 Ohm
• Sensitivity: -36 dB re 1Volt/Pascal (16mV @ 94 dB SPL) +/-2 dB
• Equivalent Noise: 7 dBA SPL (per IEC651, IEC268-15)
• Maximum Output: +15 dBu (@ 1% THD into 1k Ohm)
• Dynamic Range: 136 dB (per IEC651, IEC268-15)
• Maximum SPL: 147 db (@ 1% THD into 1k Ohm) 157 dB (@ 1% THD into 1k Ohm) with pad at maximum
• Signal/Noise: 84 dB (per IEC651, IEC268-15)
• Power Requirements: Phantom P48 or P24 Volts
• Packed Weight: 2.6 kg
• Mic Dimensions: Diameter: 60mm Length: 232.5mm
• Packed Dimensions: 415 x 340 x 150mm
• Mic Weight: 831 g

The included Rode NTSM2 is a shock mount for Rode NT2-A, NT1000, NT2000, NTK, K2, Classic II Microphones and other condenser microphones, delivers near-perfect shock isolation, performance after performance. Effectively reduces ambient and low-frequency noise.

The included Rode RPS1000 is a good quality, professional pop shield. Complete with a stand clamp and flexible gooseneck, locates between the vocalist and microphone to prevent pops during recording.