DPA 4041-S Omnidirectional Condenser Microphone with Solid State Preamplifier

4041-S Omnidirectional Condenser Microphone with Solid State Preamplifier description:

The DPA 4041-S is an omnidirectional condenser microphone that uses the Large Diaphragm Capsule MMC4041 with the totally transparent MMP4000-S Solid State Preamplifier.

The cartridge MMC4041 can be unscrewed from the preamplifier which allows for the exchange of the preamplifier module. The frequency response from 10 Hz to 20 kHz with a 4-6 dB soft boost around 8 kHz matches the response of the highly acclaimed Type 4040 Hybrid Microphone. The DPA 4041-S is powered via the standard HMA5000 High-Voltage Microphone Amplifier (not included with the 4041-S), a microphone system that offers a totally transparent audio path with an exceptionally low noise floor of maximum 7 dB(A) and a SPL handling capability of 144 dB SPL peak.

The main features of the DPA 4041-S include:

• Principle of operation: Pressure
• Cartridge type: 24 mm (1 in) condenser w. stainless steel diaphragm
• Power supply: 130 V via HMA5000
• Frequency range, ± 2 dB: 10 Hz - 20 kHz with 4 - 6 dB soft boost at 8 kHz
• Directional characteristics: Omni
• Equivalent noise level A-weighted: Max. 7 dB(A) re. 20 µPa
• Sensitivity, nominal, ±2 dB: 90 mV/Pa;-21 dB re. 1 V/Pa
• Equiv. noise level ITU-R BS.468-4: Max. 19 dB
• Capsule diameter: 24 mm (1 in)
• Total harmonic distortion (THD): <0.5% THD up to 120 dB SPL peak, <1% up to 126 dB SPL peak
• Preamplifier frequency range: 3 Hz to 40 kHz (+0 dB/-1 dB)
• Output impedance: Matches HMA5000 input
• Cable drive capability: From microphone to HMA5000: Up to 20 m (66 ft). From Hma5000: Up to 300 m (984 ft)
• Microphone length: 170 mm (6.7 in)
• Max. SPL, peak before clipping: 144 dB
• Weight: 190 g (6.7 oz)
• Dynamic Range: Typ. 119 dB
• S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 87 dB
• Connector: 7-pin modified XLR-M (High Voltage)
• Current consumption: 5 mA