DPA HMA5000 Microphone Amplifier

HMA5000 Microphone Amplifier description:

The DPA HMA5000 is a high end microphone amplifier that give your DPA mics the amp they deserve.

With an impressive frequency range from 10 Hz to 100 kHz (+0 dB/-1 dB) and an extremely wide dynamic range of 140 dB, the DPA HMA5000 carries the clean and undistorted microphone pickup through the amplification link without any disturbance - the finest challenge for a mic amp. The DPA HMA5000 is designed for use close to the microphones to keep microphone cables as short as possible, it therefore has an extremely compact, simple and rugged chassis design.

Besides being a microphone amplifier with unsurpassed specs, DPA HMA5000 is an extremely comprehensive microphone power supply unit with 130 V for the hi-voltage microphone preamplifiers, 190 V for capsule polarisation and 6 V for heater voltage in the 4041-T tube microphone. The gain range is from -20 dB to +30 dB by individual switches per channel. Also the phase can be reversed on both channels individually. With the DPA HTP4000 adaptor, the DPA HMA5000 can be used with ordinary 48 V phantom powered microphones.

The main features of the DPA HMA5000 include:

• Frequency range, ± 2 dB: 10 Hz - 100 kHz +0 dB / -1 dB (Resistive Load)
• Total harmonic distortion (THD): <0,009% (30 Hz - 30 kHz)
• Maximum output voltage: 32 V peak
• Power consumption: Max 15 W
• Weight: 1.85 kg
• Operating temperature range: -10° C - +55° C
• Dimensions: 200 x 133 x 52 mm
• Colour: Black
• Input impedance: 30 kOhm (with HTP4000: 5 kOhm)
• Output impedance: 40 Ohm eachoutput (80 Ohm balanced)
• Crosstalk: >90 dB (20 Hz - 20 kHz)
• No. of channels: 2
• Maximum output DC offset: ±20 mV
• Output connector: Standard 3-pin male XLR connector
• Input Connector: Modified 7-pin female XLR connector
• Gain: +30 dB, +20 dB, +10 dB, 0 dB, -10 dB, -20 dB (± 0,5 dB)