DPA 4026 Compact Wide Cardioid Condenser Microphone with Rear Cable

4026 Compact Wide Cardioid Condenser Microphone with Rear Cable description:

The DPA 4026 Compact Wide Cardioid, Rear cable, P48v. Ultra-small design, ideal whenever high definition audio and insignificant size is paramount.

The DPA 4026 is a phantom powered (P48) compact condenser microphone using the same type of cartridge as the 4015 wide cardioid microphone, but is preamplified using a built-in ultra-small thick-film mounted FET-preamplifier. The 4026 has its cable (3 m as standard) rear-mounted, for situations where the microphone needs to be suspended from its own cable or mounted on a stand. The linear frequency response together with the nice and subtle high frequency lift give that brilliant sparkle of purity, which will bring your sound to a higher level. The ultra-small design makes Type 4026 the perfect choice whenever high definition audio and insignificant size is paramount. With unbelievable depth and precision, the DPA Compact wide cardioids will exceed your expectations on choirs, percussion, grand pianos, reed and brass instruments and much more.

The main features of the DPA 4026 include:

• Very high SPL capabilities for a compact microphone
• Principle of operation: Pressure Gradient
• Cartridge type: 19 mm (0.75 in) pre-polarised condenser
• Power supply: 48 V Phantom power
• Frequency range, ± 2 dB: On-axis: 40 Hz to 20 kHz
• Directional characteristics: Wide Cardioid
• Equivalent noise level A-weighted: Typ. 20 dB(A) re. 20 µPa
• Sensitivity, nominal, ±3 dB: 7 mV/Pa; -43 dB re. 1 V/Pa
• Equiv. noise level ITU-R BS.468-4: Typ. 25 dB (max. 28 dB)
• Total harmonic distortion (THD):<0.5 % THD up to 110 dB SPL peak, 1% THD up to 116 dB SPL peak
• Output impedance: <300 Ohm
• Cable drive capability: Up to 100 m (328 ft) after XLR connector
• Microphone length: 35 mm; 52 mm incl. cable relief
• Max. SPL, peak before clipping: 145 dB SPL peak
• Weight: 30 g (without cable)
• Operating temperature range: -10 to +55 °C (+14 to 131 °F)
• Cable length: 3 m
• Dynamic Range: Typ. 96 dB
• S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 74 dB(A)
• Connector: 3-pin XLR-M (Standard P48)
• Current consumption: 2.60 mA