QSC HPR122i Active PA Speaker-Single

HPR122i Active PA Speaker-Single description:

The QSC HPR122I 12 inch, 2-way Powered Multipurpose Loudspeaker. Powered speaker simplicity, QSC reliability.

The QSC HPR122i offers performers and audio professionals the power, technology and legendary reliability of QSC amplification combined with the simplicity and convenience of a multipurpose powered loudspeaker system. Whether your application is vocal reinforcement, dance music, or full tilt rock and roll and whether your need is main PA, or stage monitor, suspended or pole mounted, the HPR122i is your solution. With 131 dB of maximum output the HPR122i outperforms molded plastic box systems without significant additional weight or cost. A 12 inch low-frequency woofer with 3 inch voice coil is powered by 400 watts of class H power. A neodymium magnet design provides ample motor strength for low end performance without adding unnecessary weight. The 1.4 inch diaphragm neodymium compression driver is powered by a 100 watt, class AB+B amplifier and is loaded on a 75º conical horn. It’s the same high-frequency driver you’ll find on the HPR153F 3-way loudspeaker system.

The main features of the QSC HPR122I include:

• Ideally suited for use as main PA or monitor
• High continuous power: 500 watts total amplifier power
• 75º conical horn provides predictable coverage regardless of cabinet orientation
• Nine (9) M10 suspension points allow for multiple suspended applications
• Configuration: 12 inch 2-way multipurpose powered loudspeaker
• Transducers - Low Frequency: 12 inch neodymium transducer with 3 inch voice coil. High Frequency: 1.4 inch diaphragm compression driver
• Frequency Response (-3 dB): 62 Hz - 18 kHz
• Frequency Range (-10 dB): 53 Hz - 22 kHz
• Nominal coverage (-6 dB): 75° conical
• Maximum SPL (1 meter): 131 dB peak
• Amplifier Power output: 400W LF Class H, 100W HF Class AB+B
• Input impedance: 22k balanced, 11k unbalanced
• Controls: Gain, Low-cut filter (Main / Monitor), Front LED On/Off, Power Circuit breaker
• Indicators: Power, Signal, Limit
• Cooling: Convection
• Amplifier protection: Thermal and output power limiting, Output short circuit, Overtemperature muting, Driver DC protection
• Current consumption at 120 VAC (1/8 power EIA noise): 1.5A
• Enclosure: Painted Birch plywood
• Finish: Black textured paint
• Grille: Powder coated 16 gauge steel
• Suspension/Attachment Points: 9 M10 rigging locations
• Connectors: Balanced female XLR line level input, Balanced male XLR full range line level out
• Dimensions: 26.9 H x 14.7 W x 14.9 D, inches (683 mm x 373 mm x 379 mm)
• Net weight: 60 lbs / 27.2 kg
• Available Accessories: HPR COVER 122, HPR POLE 31, HPR YOKE 122, HPR M10 KIT, HPR SUS KIT 122