AKG GN 30 30cm Gooseneck Module

GN 30 30cm Gooseneck Module description:

The AKG GN 30 30 cm Gooseneck inc External 3 Pin XLR PP Adapter. Good modular gooseneck, quick to install.

The AKG GN 30 gooseneck microphone for permanent screw-on installation, can often be seen in use on lecterns and desks in houses of worship and conferences. The AKG GN30 is approximately 30 cm (12 in.) long and has a 1.5 metre cable with a mini XLR connector which can connect to the included DPA in-line XLR phantom power adapter with integrated 200 Hz bass rolloff and LED ON/OFF jumper. The DPA connects to any standard mixer input with 9 to 52 V power supply. The mini XLR connector will thread through any hole from 11 mm (0.44 in.) in diameter. This eliminates the need for large holes or awkward unsoldering and resoldering of the much larger phantom power adapter during installation. This gooseneck requires an AKG capsule module (not included) e.g an AKG CK 31, CK 32, CK 33, CK 47 or CK 80.

The main features of the AKG GN 30 include:

• Rugged construction
• Highly reliable contacts for capsule modules
• Integrated LED ring status indicator
• Integrated switchable bass rolloff
• Mini XLR connector
• Bass filter: 250 Hz, -10 dB at 50 Hz
• Impedance: <=600 ohms
• Recommended load impedance: >=2,000 ohms
• Supply voltage: 9 to 52 V phantom power to DIN/IEC
• Current consumption: <3 mA
• Connector: 3-pin male XLR
• Cable: 1.5 m (5 ft.)
• Finish: matte dark grey
• Net weight - GN 15: 72 g (2.5 oz.), GN 30: 110 g (3.9 oz.), GN 50: 120 g (4.2 oz.)
• Shipping weight - GN 15: 400 g (14.1 oz.), GN 30: 522 g (18.4 oz.), GN 50: 495 g (17.5 oz.)
• Includes an in-line DPA phantom power adapter and a screw mounting set with rubber bush