Audix Micro M1280 Micro Size Condenser Microphone

Micro M1280 Micro Size Condenser Microphone description:

The Audix MICRO M1280 Micro size condenser - 90mm long - integrated preamp, cardioid. High performance, high SPL miniature condenser microphone.

The Audix MICRO M1280 miniaturised condenser microphone with a fully integrated preamp and detachable cable, is designed to have complete immunity from RF interference caused by cell phones and GSM devices. The M1280 Cardioid version can be used in a wide variety of live, studio and broadcast applications. A wide array of clips and accessories allow clever, discreet mounting for drums, percussion, musical instruments, overhead stage miking, podiums, conferences and presentations.

The main features of the Audix MICRO M1280 include:

• High performance, high SPL miniature condenser microphone
• Perfect for Acoustic instruments, Ambient room miking, Symphonic area miking, Overhead mic for choir, group vocal, Speech / Presentation, Cymbals / Percussion applications
• Small, lightweight, low profile
• Miniaturised integrated preamp circuitry
• No external power adapter needed
• 12mm gold vapor diaphragm
• Immune to RF interference
• Extremely low noise, high SPL handling
• Transducer Type: Condenser
• Frequency Response: 40 Hz - 20 kHz
• Polar Pattern: Cardioid
• Output Impedance: 150 ohms
• Sensitivity at 1k: 7.8 mV/ Pa (-42 dbV +/-1.5 dB)
• Recommended Load Impedance: > 1000 ohms
• Signal/Noise Ratio (A-weighted): 73 dB
• Equivalent Noise Level (A-weighted): 21 dB
• Maximum SPL @ .5% THD: 150 dB
• Dynamic Range: 129 dB
• Power Requirements: 48 – 52 V
• Connector: 3 pin mini-XLRm
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
• Housing / Finish: Brass / paint
• Weight: 1 oz / 28 grams
• Length: 3.5 inches / 90 mm
• SUPPLIED ACCESSORIES: 25 foot cable with mini-XLRf - XLRm connectors (CBL-M25), Mic stand adapter (MC-MICRO), Hanging clip (MC-HANGER), Foam windscreen (WS1218), Carrying pouch
• OPTIONAL ACCESSORIES: MICROBOOM -50-inch carbon fiber boom arm with clutch assembly, SMT-MICRO -Stand adapter with rubber insulated shock mount, DCLAMP-MICRO -Lug mount adapted for hand percussion instruments with shock mount ring, DVICE-MICRO -Drum rim mount attachment with shock mount ring, MC20i -Clamp on clip for Saxophone with shock mount ring, MGN-6 -6-inch gooseneck with base terminating in standard XLRm, MGN-12 -Same as above in 12 inch length, MGN-18 -Same as above in 18 inch length