Shure MX410/C Microflex 10" Gooseneck Microphone

MX410/C Microflex 10" Gooseneck Microphone description:

The Shure MX410/C Microflex 10" Miniature Gooseneck Microphone, Cardioid. Unsurpassed style and performance for conference rooms and similar applications.

The Shure MX410/C Microflex 10 inch Miniature Gooseneck Microphone is part of the highly flexible Microflex microphone range. Beyond their fully adjustable miniature goosenecks lies a high level of flexibility in the Microflex interchangeable condenser microphone cartridge (a Cardioid cartridge is included with this MX410/C model). Designed for easy replacement and available in cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges offer wide frequency response and accurate sound reproduction for a broad variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the Microflex product line for enhanced convenience and consistent sound.

Microflex Miniature Gooseneck microphones deliver unsurpassed style and performance for conference rooms and similar applications. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, it’s easy to get the perfect fit for your conferencing installation. And every Microflex Miniature Gooseneck is resistant to RF interference from portable mobile and handheld devices.

This model is the MX410/C (Cardioid) 10 inch (254 mm), bi-color status indicator, includes surface mount preamp (MX400SMP).

The main features of the Shure MX410/C include:

• 10-inch Miniature Gooseneck Condenser Microphone with a Microflex Cardioid interchangeable condenser microphone cartridge
• A wide variety of applications from the podium to the conference table
• Interchangeable condenser cartridges with superior audio quality
• Resistant to RF interference from portable mobile and handheld devices
• Includes RK513WS Snap-fit foam windscreen (4 pcs.), MX400SMP Surface mount preamp, 65A405 Rubber isolation rings, 65A2190 Wing nut, 95A2529 5-pin XLR-F Connector and 65A2166 Cap
• Optional Accessories and Replacement Parts Include: MX400SMP Surface mount preamp, MX400DP Wired desktop base (Includes 6.1 m / 10 ft. attached cable), MX890 Wireless desktop base (compatible with SLX Wireless Systems), R185B Black cardioid cartridge, R184B Black supercardioid cartridge, R183B Black Omnidirectional cartridge, A412MWS Metal locking windscreen, 95A2487 Tapered windscreen
• Type: Condenser (electret bias)
• Frequency Response: 50 – 17,000 Hz
• Polar Pattern - MX405/C, MX410/C: Cardioid, MX405/S, MX410/S: Supercardioid (Omnidirectional cartridge available separately)
• Output Impedance: EIA rated at 150 Ohms (170 Ohms actual)
• Sensitivity (at 1 kHz, open circuit voltage; 1 Pascal = 94 dB SPL) - Cardioid: -35 dBV/Pa (18 mV), Supercardioid: -34 dBV/Pa (21 mV)
• Maximum SPL (1 kHz at 1% THD, 1 kOhm load) - Cardioid: 121 dB, Supercardioid: 120 dB
• Equivalent Output Noise (A-weighted) - Cardioid: 28 dB SPL, Supercardioid: 27 dB SPL
• Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz) - Cardioid: 66 dB, Supercardioid: 67 dB
• Dynamic Range (1 kOhm load at 1 kHz): 93 dB
• Common Mode Rejection: 45 dB minimum (10 Hz – 100 kHz)
• Preamplifier Output Clipping Level (1% THD): -8 dBV (0.4 V)
• Mute Switch Attenuation: -50 dB minimum
• Polarity - 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector. 5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector.
• Weight - MX405: 54 g (0.119 lbs), MX410: 68 g (0.150 lbs)
• Logic Connections - LED IN: Active low (=1.0 V), TTL compatible. Absolute maximum voltage: -0.7 V to 50 V. LOGIC OUT: Active low (=1.0 V), sinks up to 20 mA, TTL compatible. Absolute maximum voltage: -0.7 V to 50 V (up to 50 V through 3 kOhms).
• Mute Switch Attenuation: -50 dB minimum
• Environmental Conditions - Operating temperature range: -18° – 57° C (0° – 135° F), Relative humidity: 0 – 95%
• Power Requirements: 48 – 52 Vdc phantom, 8.0 mA