The Dynacord SUB 112 contains a passive filter, 6 dB/oct., that suppresses high frequencies. Appropriate fullrange cabinets can therefore be directly connected in parallel to the SUB 112 if an extended bass reproduction is required. You just have to connect the SUB 112 and the D 8 with a regular Speakon cable in parallel.
The conical vent system shows significantly less distortion and lower air noise at low frequencies than common circular vent openings. The SUB 112 cabinet is made of 15mm birch plywood. All corner joints and braces are grooved and glued. The cabinet´s surface is painted with a 2-K laquer finish . The acoustic foam front on a powder coated steel grille protects the woofer against damage during transport and bad environmental conditions.
The connector panel uses two 4-pole Speakon connectors (INPUT/THRU) for a safe connection and easy daisy-chaining to other cabinets. The pin assignment is 1+/1-. Pins 2+ and 2- are also connected between the two Speakon connectors. A pole-mount flange allows easy speaker-on-a-stick applications. The cabinet is equipped with four large rubber feet. Two handles allow easy and safe transport.
Dynacord D-Lite Sub 112 Passive Subwoofer (code 53355)
400w. Vented, direct radiating cabinet, equipped with a high-power neodymium transducer.
£810.99 (inc vat)