The Laserworld PRO-1600 RGB Laser Light is a white light RGB laser light system with a total output power of up to 1600mW. It is not only equipped with fast scanners for great projections, it also comes with the super bright 637nm red, that is visible several times better than the 650nm plus has a thinner, more accurate beam profile. Therefore the Laserworld PRO-1600RGB ensures great visibility and is suitable for beam as well as for graphics projections.
This show laser light provides an analogue modulation. It means a better colour fading and a much broader colour hue. These facts make the Laserworld PRO-1600RGB ideal for all applications requiring many different colour hues and colour fadings.
The very advantage of the projectors of the Proline Series is the integrated Glass Effects Actuator: The systems not only run in normal scanner mode. Similar to an optical bench they are equipped with additional grating effects. Without the effects it is possible to show emotionalizing beam shows as well as graphics projections.
The integrated effects can be used individually through selecting a dip switch on the back panel or with a DMX controller, in addition all integrated effects can be used through Automatic mode or Music Mode including in conjunction with ILDA software for spectaculars results
The Laserworld PRO-1600RGB has an ILDA interface for professional computer control. Thus own or pre-programmed laser shows can be displayed by use of a laser control software, e.g. of Phoenix or Pangolin.
The main features of the Laserworld PRO-1600 RGB Laser Light include:
- Total Power typical: 1600mW
- Guaranteed power: 1300mW
- Power Red: >300mW / 637nm
- Power Green: >300mW / 532nm
- Power Blue: >700W / 445nm
- Beam Specifications: ca. 3mm / ca. 1.3mrad
- Laser Sources: Diode, DPSS Laser
- Laser Class: 4
- Operation Modes: auto, music, DMX, ILDA, master-slave, SD Card
- Scanner: Galvo system, up to 40kpps @4°
- Scan Angle max.: 40° max. / 80° for glass effects
- Basic Patterns: >200 Patterns (layers, tunnels, fences, waves etc.; grating & 3D effects)
- Accessories: power cable, remote control unit, SD Card, manual, interlock connector, key
- Power Supply: 85V - 250V AC
- Power Consumption: 80 W
- Dimensions: 235/205/165 mm
- Weight: 4.75 kg