The AKG C 562CM Ceiling Mounted Miniature Boundary Layer Microphone. Small and inconspicuous, ideal for surveillance or live recording, can cover an entire room.
The AKG C 562CM flush-mount boundary microphone uses the same transducer as the C 562 BL. The AKG C 562 CM has been designed specifically for permanent, "invisible" mounting in ceilings, walls, tables, stage props, etc.
Owing to its high sensitivity, the C 562 CM is a perfect tool for surveillance or live recording since a single microphone can cover an entire room. The supplied XLR phantom power adapter connects to the microphone cable through a miniature connector so installation holes can be smaller than the diameter of the phantom power adapter.
The main features of the AKG C 562CM include:
- Small, low-profile boundary layer microphone
- Wide frequency range
- High sensitivity
- Ideal for inconspicuous installation in a room
- Suited for surveillance or recording
- Polar pattern: Omnidirectional (hemispherical)
- Frequency range: 20 Hz to 20 kHz
- Sensitivity: 25 mV/Pa (-32 dBV)
- Max. SPL: 130 dB (for 1% THD)
- Equivalent noise level: 16 dB-A
- Signal/noise ratio (A-weighted): 78 dB
- Impedance: 600 ohms
- Recommended load impedance: >2000 ohms
- Supply voltage: 9 to 52 V phantom power to DIN 45596
- Current consumption: <2 mA
- Connector: 3-pin Male XLR
- Cable: 0.5 m (20 in.)
- Finish: Matte nickel plated
- Net weight: 30 g (1.1 oz.)
- Shipping weight 195 g (76.9 oz.)
AKG C 562 CM Miniature Boundary Layer Microphone (code 48290)
Ceiling Mounted. Small and inconspicuous, ideal for surveillance or live recording, can cover an entire room.
£134.85 (inc vat)