Audix F15 Condenser Microphone

F15 Condenser Microphone description:

The Audix F15 Condenser Instrument Microphone is designed for live sound and studio applications.

Characterized with a tailored frequency response of 100 Hz - 20 kHz, the Audix F15 is ideally suited for instruments requiring detailed reproduction in mid-high and extended high end frequency ranges. A wide cardioid pick-up pattern along with high sensitivity allows for close miking as well as overhead and distance miking.

Compact and roadworthy, the F15 features a durable die cast zinc alloy body and steel mesh grill.

Low impedance and balanced output allow interference-free performance even with long cable runs. The F15 operates on phantom power of 9-52 volts.

The Audix F15 Condenser Instrument Microphone Main Features Include:

• Multi-purpose instrument micrphone
• Excellent for capturing high frequencies
• Easy to position and use
• Roadworthy construction
• Applications: Cymbals, Overheads, Hi-Hat, Goodie Table, Audience mic
• Transducer Type: Pre-polarized condenser
• Frequency Response: 100 Hz - 20 kHz
• Polar Pattern: Cardioid
• Output Impedance: 200 ohms
• Sensitivity: 10 mV / Pa @ 1k
• Capsule Technology: Black plate electret
• Off Axis Rejection: =15 dB
• Noise Floor 25 dB: (A weighted)
• Signal to Noise Ratio: 69 dB
• Dynamic Range: 110 dB
• Maximum SPL: =135 dB
• Power Requirements: 9-52 volts phantom
• Connector: 3 pin gold plated male XLR connector
• Polarity: Positive pressure on diaphragm produces positive voltage on pin, 2 relative to pin 3 of output XLR connector
• Housing / Finish: Die cast zinc / Black E-Coat
• Weight: 184 g / 6.5 ounces
• Length: 160 mm / 6.3 inches