The rugged and lightweight MC 836 shotgun microphone has been designed to meet the demands of ENG and EFP applications.
Due to its acoustical characteristics it is also suited for film applications. The directional polar pattern helps to suppress lateral and background noise. The microphone operates according to the pressure gradient/line transducer technique. A switchable low frequency roll-off eliminates unwanted low frequencies at a cut-off frequency of 90 Hz. An integrated footfall sound insulation avoids the transmission of noise below 40 Hz.To avoid wind noise when used outdoors, a wind shield must be used. The microphone can be operated with a phantom power supply of 11 - 52 V.
Features:
- Lobe/Cardioid polar pattern
- Very wide frequency response
- Low frequency roll-off switch
- Phantom power supply 11 - 52 V
Specifications:
- Transducer type: Condenser
- Operating principle: Pressure gradient/line transducer technique
- Polar pattern: Lobe/cardioid
- Open circuit voltage at 1 kHz (0dB = 1V/Pa): 30 mV/Pa
- Nominal impedance: 180 Ohms
- Load impedance: 1000 Ohms
- Connector: 3-pin XLR
- Length: 248 mm
- Shaft diameter: 21 mm
- Head diameter: 21 mm
- Weight without cable: 116 g
- Frequency response: 40 - 20,000 Hz
- Max. SPL at 1 kHz: > 130 dB
- A-weighted equivalent SPL approx.: 13 dB
- Power supply: 11 - 52 V phantom power
- Current consumption: 4.3 mA
Beyerdynamic MC 836 Condenser Shotgun Microphone (code 20698)
Designed to meet the demands of ENG and EFP applications. Lobe/Cardioid polar pattern. The microphone can be operated with a phantom power supply of 11 - 52 V.
£759.99 (inc vat)