DPA 4011C Compact Cardioid Microphone

4011C Compact Cardioid Microphone description:

The DPA 4011C Compact Cardioid Microphone is part of the Reference Standard Series and is designed for close miking in multiple environments. The 4011C delivers stunning clarity and absolute neutrality. Great for miking all types of television, film, theatre, concert and vocal studio performances.

The 4011C from DPA can handle high SPL levels. The 4011C is made for close miking, while minimizing bleed from other instruments. When recording orchestras or from a live camera the 4011C is the perfect choice being inconspicuous and technically accurate. In concert halls, theatres and houses of worship, the 4011C provides clean, natural sound while reducing the noticeable effect of lighting reflection.

The main features of the 4011C include:

Directional characteristics: Cardioid
Principle of operation: Pressure gradient
Cartridge type: Pre-polarized condenser
Frequency range: 20 Hz to 20 kHz
Frequency range, ± 2 dB: 40 Hz to 20 kHz
Sensitivity, nominal ± 2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 18 dB(A) re. 20 µPa (max. 20 dB)
Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 76 dB(A)
Total Harmonic Distortion (THD): < 1 % up to 139 dB SPL peak
Dynamic range: Typ. 121 dB
Max. SPL, peak before clipping: 152 dB
Minimum load impedance: 2 kohm
Output impedance: < 200 ohm
Cable drive capability: 100 m (328 ft)
Output balance principle: Impedance balancing with Active Drive
Common Mode Rejection Ratio (CMRR): > 50 dB
Power supply (for full specifications): 48 V Phantom power (± 4 V)
Current consumption: 2.8 mA
Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Colour: Matte black
Weight: 58 g (2 oz)
Microphone diameter: 19 mm (0.75 in)
Capsule diameter: 19 mm (0.75 in)
Length: 64 mm (2.5 in)
Output voltage, RMS: > 4 V
Polarity: +V at Pin 2 for positive sound pressure
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH): Up to 90 %
Matching tolerance: ± 1 dB
Phase deviation for kit: < 10°