The Type 4033 is a phantom powered (P48) omnidirectional condenser microphone using the same type of cartridge as the reference microphone Type 4007, but is preamplified using a build-in ultra-small thick- film mounted FET- preamplifier. The 4033 has a standard LEMO- connector for simple and safe mounting and removal of the microphone capsule.
The extremely linear frequency response from 20Hz to 40kHz (2dB) and a SPL handling capability of 144dB SPL peak before clipping occurs makes the Type 4033 a professional choice in close miking situations with percussion, wind instruments or grand piano. The Microphone is supplied with a 5m cable Lemo to XLR.
Features:
- High SPL Capability
- Professional choice for percussion, wind instruments or grand piano
- XLR output on a 5m cable
- Compact, Miniature Profile - The miniature design is attributed to the built-in ultra-small, thick-film mounted FET-preamplifier
- Includes DUA0030 Small Windscreen
Specifications:
- Principle of operation: Pressure
- Cartridge type: Pre-polarised condenser Type MM0043
- Frequency range, ± 2 dB: On-axis: 20 Hz - 40 kHz ±2 dB
- Directional characteristics: Omnidirectional
- Equivalent noise level A-weighted: Typ. 24 dB(A) re. 20 µPa
- Sensitivity, nominal, ±2 dB: Nominally 8 mV/Pa (at 250 Hz)
- Equiv. noise level ITU-R BS.468-4: Typ. 36 dB (max. 38 dB)
- Total harmonic distortion (THD): 130 dB SPL peak (<0.5 % THD)
- Output impedance: <300 Ohm
- Cable drive capability: Up to 100 m (328 ft)
- Microphone length: 21 mm (0.8 in); 58 mm (2.3 in) (incl. connector)
- Max. SPL, peak before clipping: 144 dB before clipping
- Weight: 14 g (0.49 oz) (without cable)
DPA 4033 Compact Omnidirectional Condenser Microphone (code 20910)
A professional choice in close miking situations with percussion, wind instruments or grand piano. The Microphone is supplied with a 5m cable Lemo to XLR.
£1,535.00 (inc vat)