The DPA 4067-F Adjustable Miniature Microphone Headband, Lo-Sens & DC, Beige. Highly regarded by engineers and the chosen headband for theaters on Broadway and the West End.
The DPA 4067-F is a flexible miniature microphone solution, that features very easy and fast adjustment possibilities. The headband construction is unique in design, because it gives the user the choice between left and/or right mounting and colour change. It is also possible to use the MMB4066 Miniature Microphone Boom, Omnidirectional, separately, in applications where the headband is not needed. The 4067 offers a clean and transparent sound quality with lots of headroom. Attention has been paid to the humidity problems that often occur in theatrical applications. A double vent protection system, a drop stopper on the microphone boom, together with water resistant materials inside the microphone, makes it more than difficult for the humidity to cause the headband Microphone to fail. The headband surface is matgold plated and headband earhooks are covered with a silicon hose. The sensitivity is 1 mV/Pa to match the level of the human voice to the general input sensitivity of most wireless transmitters. If powered correctly the microphone will be able to handle sound pressure levels up to 154 dB SPL before clipping occurs. A wide range of connection adapters makes it possible to use the 4066 with most of the professional wireless systems available plus 48 V phantom XLR connection. The DPA 4067 is delivered with 3 foam windscreens. The 4067-F (Beige) is a low DC and extra low sensitivity version of the famous DPA 4066. The sensitivity is adjusted to 1mV/Pa and the DC offset in the FET lowered, making matching to systems delivering down to 3 V power supply possible.
The main features of the DPA 4067-F include:
- Very high SPL capabilities for a miniature microphone
- Flexible microphone used for speech and vocals in Broadcast, Stage and Television
- Principle of operation: Pressure
- Cartridge type: Pre-polarised condenser element with vertical diaphragm
- Power supply: Min. 3 V - max 50 V through DPA adapter
- Frequency range, ± 2 dB: Soft boost grid: 50 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz, lo-cut -10 dB at 20 Hz. High boost grid: 50 Hz - 20 kHz ±2 dB, 10 dB boost at 12 kHz, lo-cut -10 dB at 20 Hz
- Directional characteristics: Omnidirectional
- Equivalent noise level A-weighted: Typ. 31 dB(A) re. 20 µPa (max. 35 dB(A))
- Equiv. noise level ITU-R BS.468-4: Typ. 42 dB (max. 44 dB)
- Total harmonic distortion (THD): <1% THD up to 123 dB SPL peak
- Preamplifier frequency range: 20 Hz to 50 kHz (+0 dB/-3 dB)
- Output impedance: 30 - 40 Ohm
- Cable drive capability: Up to 300 m (984 ft)
- Max. SPL, peak before clipping: 154 dB
- Weight: <14 g (0.5 oz) incl. cable and MicroDot connector
- Cable length: 1.2 m (3.9 ft)
- Cable colour: Beige
- Colour: Beige
- Dynamic Range: Typ. 63 dB
- S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 68 dB(A)
- Connector: MicroDot
- Sensitivity, nominal, ±3 dB: 1 mV/Pa; -60 dB re. 1 V/Pa
DPA 4067-F Adjustable Miniature Microphone Headband Lo-Sens & DC - Beige (code 45655)
Highly regarded by engineers and the chosen headband for theaters on Broadway and the West End.
£404.33 (inc vat)