The 4071-BM features a specially designed, fixed microphone grid with a soft presence boost of typically 5 dB at 4 - 6 kHz. Speech intelligibility, clarity and definition of voices and instruments lie within the area that the 4071 grid boosts. While clarity seems to be missing from chest-worn microphone placement, the 4071 will make voices cut through. Typical applications are ENG/EFP use on the reporter in studio or in the field, or film production use, with hidden microphone placements on the actors.
When recording voices from mic placement on a performers body, no frequency below 100 Hz is attractive. For this reason, an acoustical low-cut has been incorporated in the 4071 capsule so the built-in pre amp, and the perhaps following wireless system, will have much larger headroom. Apart from the low-cut feature, type 4071 uses the same prepolarised omnidirectional miniature condenser capsule as its world-famous "brother" 4061. A wide range of connection adapters makes it possible to use the 4071 with most professional wireless systems available plus 48 V phantom.
A wide range of accessory equipment is available from DPA Microphones to offer the engineer easy, fast and safe mounting of the 4071. Two accessory kits, the DAK4071-E and DAK4071-F, complete this carefully prepared microphone solution.
Features:
- Acoustical Low-cut feature enables larger headroom
- Ideal for the Reporter in the studio or the field
- Widely used in film production use, with hidden microphone placements on the actors
- Adapters for all wireless systems + XLR
- A combination of DAD6024 (optional 800Hz attenuator) and the 4071 Miniature Microphone makes your recording capable of going directly to tape or on air without editing
- High SPL Capabilities for a miniature microphone
- Clean transparent sound
- Wide dynamic range
Specifications:
- Principle of operation: Pressure
- Cartridge type: Pre-polarised condenser element with vertical diaphragm
- Power supply: Min. 5 V - max 50 V through DPA adapter
- Frequency range, ± 2 dB: 100 Hz - 15 kHz with 5 dB soft boost at 4 - 6 kHz
- Directional characteristics: Omnidirectional
- Equivalent noise level A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
- Equiv. noise level ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
- Capsule diameter: 5.4 mm
- Total harmonic distortion (THD): <1% THD up to 123 dB SPL peak; <1% up to 120 dB SPL sine
peak
- Preamplifier frequency range: 20 Hz to 50 kHz (+0 dB/-3 dB)
- Output impedance: 30 - 40 Ohm
- Cable drive capability: Up to 300 m (984 ft)
- Microphone length: 17 mm
- Max. SPL, peak before clipping: 144 dB
- Weight: 9 g incl. cable and MicroDot connector
- Cable length: 1.8 m (5.9 ft)
- Cable colour: Black
- Dynamic Range: Typ. 97 dB
- S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 68 dB(A)
- Connector: MicroDot
- Sensitivity, nominal, ±3 dB: 6 mV/Pa; -44.4 dB re. 1 V/Pa
DPA 4071-BM Miniature Omnidirectional Microphone Presence Boost - Black (code 31575)
Typical applications are ENG/EFP use on the reporter in studio or in the field, or film production use, with hidden microphone placements on the actors.
£334.71 (inc vat)