The DPA 4071-WM Miniature Microphone with presence boost, Lo-Sens, White. Highly regarded by engineers for speech and instrument use, very high SPL capability and low-cut feature.
The DPA 4071-WM features a specially designed, fixed microphone grid with a soft presence boost of typically 5 dB at 4 - 6 kHz. Speech intelligibility, clarity and definition of voices and instruments lie within the area that the 4071 grid boosts. While clarity seems to be missing from chest-worn microphone placement, the 4071 will make voices cut through. Typical applications are ENG/EFP use on the reporter in studio or in the field, or film production use, with hidden microphone placements on the actors. When recording voices from mic placement on a performers body, no frequency below 100 Hz is attractive. For this reason, an acoustical low-cut has been incorporated in the 4071 capsule so the built-in pre amp, and the perhaps following wireless system, will have much larger headroom. Apart from the low-cut feature, type 4071 uses the same prepolarised omnidirectional miniature condenser capsule as its world-famous "brother" 4061. A wide range of connection adapters makes it possible to use the 4071 with most professional wireless system available plus 48 V phantom. A wide range of accessory equipment is available from DPA Microphones to offer the engineer easy, fast and safe mounting of the 4071. Two accessory kits, the DAK4071-E and DAK4071-F, complete this carefully prepared microphone solution.
The main features of the DPA 4071-WM include:
- Very high SPL capabilities for a miniature microphone
- Ultrasafe microphone choice used for speech and instruments in Broadcast, Stage and Television
- Principle of operation: Pressure
- Cartridge type: Pre-polarised condenser element with vertical diaphragm
- Power supply: Min. 5 V - max 50 V through DPA adapter
- Frequency range, ± 2 dB: 100 Hz - 15 kHz with 5 dB soft boost at 4 - 6 kHz
- Directional characteristics: Omnidirectional
- Equivalent noise level A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
- Equiv. noise level ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
- Total harmonic distortion (THD): <1% THD up to 123 dB SPL peak
- Preamplifier frequency range: 20 Hz to 50 kHz (+0 dB/-3 dB)
- Output impedance: 30 - 40 Ohm
- Cable drive capability: Up to 300 m (984 ft)
- Max. SPL, peak before clipping: 144 dB
- Weight: 9 g incl. cable and MicroDot connector
- Cable length: 1.8 m (5.9 ft)
- Cable colour: White
- Colour: White
- Dynamic Range: Typ. 97 dB
- S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 68 dB(A)
- Connector: MicroDot
- Sensitivity, nominal, ±3 dB: 6 mV/Pa; -44.4 dB re. 1 V/Pa
DPA 4071-WM Miniature Condenser Microphone with Presence Boost - White (code 45664)
Typical applications are ENG/EFP use on the reporter in studio or in the field, or film production use, with hidden microphone placements on the actors. White version.
£368.00 (inc vat)