Search our site

Basket (0) £0.00

view site map

SE Electronics Ribbon Large Ribbon Microphone

Click here for a review of the SE Electronics Ribbon Large Ribbon Microphone

Save ££s - Choose Drum Mic Kit Bundle Instead

sE Electronics R1 Ribbon Microphone image

SE Electronics Ribbon Large Ribbon Microphone

Ribbon Large Ribbon Microphone description:

The sE Electronics R1 Ribbon Microphone is a beautiful piece of engineering. Its single ‘Figure of 8’ polar pattern is derived from an incredibly fine 2 micron Aluminium membrane. As such it has a higher-than-normal frequency roll-off (at around 7KHz), and greater sensitivity, producing a more open and natural sound than you’d expect form a ribbon mic.

The R1 Ribbon Microphone from Se Electronics is ideally suited to recording Electric Guitar cabs, Overhead Drum micing, Brass and woodwind Instruments, String Sections and for Commercial Broadcast and Voice Over. It comes with a 10 year replacement capsule guarantee

The sE Ribbon Mic brings the advantages of the smooth classic sound of a high quality hand crafted Ribbon microphone within the reach of more users.

The main features of the sE R1 Ribbon include:

  • The sE Ribbon R1 comes complete with shockmount
  • 1.8 Micron pure aluminum ribbon element
  • Large ribbon geometry design
  • Rare Earth Neodymium Magnet
  • VOX – Velocity Optimized Extension for superior sensitivity / output
  • Warranty includes 3 Ribbon replacements
  • Recommended for: Electric Guitar, Overhead Drum micing, Brass Instruments, Vocals, Horn Sections, Woodwind Instruments, String Sections, Broadcast

Specifications:

  • Operating Principle: Electrodynamic pressure gradient (velocity Microphone)
  • Polar Pattern: Figure-8
  • Transducer Element: 1.8-micron aluminum ribbon - 45mm/1.77" tall, 4.5mm/.177" wide
  • Magnets: Rare Earth Neodymium
  • Frequency Response: m30 -15,000 Hz +/- 3dB
  • Output Sensitivity: > -52 dBv Re. 1v/pa
  • Output Impedance: 300 Ohms
  • Rated Load Impedance: 300 Ohms
  • Maximum SPL: >135dB over rated frequency response (more over 1K…)
  • Powering: Not needed or recommended. Tolerant of properly wired phantom power through a good cable.
  • Output Connector: Male XLR 3 pin
  • Dimensions: 168mm L, 40mm W
  • Weight: 450g
  • Finish: Mesh grille: satin nickel, Body: matte gray

SE Electronics Ribbon Large Ribbon Microphone (code 30188)
Its single ‘Figure of 8’ polar pattern is derived from an incredibly fine 2 micron Aluminium membrane. Comes complete with shockmount.
£149.99 (inc vat)

MPN: RIBBON

Manufacturer: SE Electronics

This page first created on: 27/06/2007

Customers who bought this also bought

Audix SCX-25 Condenser Microphone
  • £524.40
  •  
  • usually shipped in 3-12 working days
Audix SCX-25 Condenser Microphone
TC Electronic Finalizer 96K Studio Mastering Processor
  • £1,075.00
  •  DV are the UK's No.1 TC Electronic Dealer
  • in stock
TC Electronic Finalizer 96K Studio Mastering Processor

£149.99 (inc vat)

179.09 € (euros)

code 30188

Manufacturer Part No: RIBBON

in stock

  • Price Beater
  • Email Sales
  • Print this page

Alternative Instrument Microphones

SE Electronics RNR1 Active Ribbon Microphone small image

SE Electronics
RNR1 Active Ribbon Microphone

usually shipped in 3-12 working days

£1,599.00

SE Electronics Ribbon Mic Set small image

SE Electronics
Ribbon Mic Set

Incredible Deal - Don't Miss Out

in stock

£299.00

SE Electronics Engineers Mic Bundle small image

SE Electronics
Engineers Mic Bundle

Expand Your Mic Collection

in stock

£599.00

Superlux R102 Aluminum Ribbon Microphone small image

Superlux
R102 Aluminum Ribbon Microphone

not currently in stock, call DV for info

£109.99

DV 6-Piece Ribbon Drum Mic Kit small image

DV
6-Piece Ribbon Drum Mic Kit

Save ££s with this Drum Mic Bundle

in stock

£649.00