This bundle consists of an sE Electronics Z3300A Condenser Mic and an sE Electronics Metal Pop Shield.
The sE Electronics Z3300A is a class A, FET microphone and utilises a large 1.07 inch twin diaphragm which gives the engineer a choice of three polar patterns, omni, cardioid and figure of eight.
Couple this with a 100Hz low cut filter and new ultra clean, ultra quiet Z range electronics and the Z3300A is a solid state microphone ready for almost all recording applications, from vocals, to pianos and acoustic instruments.
sE Electronics Z3300A features:
- Multi Pattern - omni, cardioid and figure of eight
- 100Hz low cut filter
- Complete with shockmount and flightcase
- Frequency Response: 20Hz-20KHz
- Sensitivity: 12.6mV/Pa - 38 ± 2dB(0dB=1V/Pa 1000Hz)
- Polar Pattern: Cardioid, Omni, Figure 8
- Impedance: = 200 Ohms
- Equivalent Noise Level: 20dB(A weighted)
- Max SPL for 0.5% THD@1000Hz: 125dB
- Power Requirement: Phantom power 48V +/- 4V
- Connector: 3-pin XLR
The sE Electronics Dual Pro Pop Professional Pop Screen is a professional solution to the problem of needing different pop shields to suit vocal performances.
The sE Electronics Dual Pro Pop has a stong goose neck with both a standard fabric membrane and a pro metal pop shield on a hinge mechanism. You can use either separately or both simultaneously depending on the application.
SE Electronics Z3300A & FREE sE Metal Pop Shield (code 70039)
Condenser Microphone plus FREE sE Metal Pop Shield [UXB]
£199.00 (inc vat)